3D PRINTERS & SCANNERS

UltiMaker Print Core BB 0.4mm for use with PVA support material. Print Cores are the entire hot-end for use with the UltiMaker 3 and S-series, with a chip built-in to communicate and sync with the printer. This chip contains information about the print core type and its runtime statistics. Print Cores are designed as a single assembly, making them easy to change and increases uptime.

UltiMaker Print Core BB 0.8mm for use with PVA support material. Print Cores are the entire hot-end for use with the UltiMaker 3 and S-series, with a chip built-in to communicate and sync with the printer. This chip contains information about the print core type and its runtime statistics. Print Cores are designed as a single assembly, making them easy to change and increases uptime.

Owens Corning XSTRAND ™ Filament is a polypropylene filament. The material is a chemically resistant filament with glass fibers known for their mechanical strength. The combination of these two materials makes the GF30-PP XSTRAND ™ ideal for highly resistant 3D polypropylene prints of functional prototypes and demanding industrial applications.

High rigidity:The glass fiber reinforcement of this polypropylene filament gives high-strength 3D printing up to 3 times more mechanical strength than ABS

Durability: GF30-PP XSTRAND ™ filament has good heat resistance, chemical resistance and UV resistance

Print Quality: The PP fiberglass filament has excellent layer adhesion, and warping, delay and losses are also limited

The Ultimaker allows for quick and easy nozzle changes, so different nozzle sizes can be selected to suit each project. Use a smaller nozzle to print fine lines for more detail, or use a larger nozzle to print thicker lines to decrease print duration. The Olsson block brass Jet nozzles have a special tip angle and shoulder width, they also have a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip more.

Features and Benefits
Clean them efficiently with cold pulls
Print faster, the plastic flows much easier than in classic nozzles
The 0.4mm is the standard size for a lot of 3D printers
The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer
Use the 0.25mm brass nozzle to print small detailed prints

Note: This nozzle is compatible with M6 Threads, you can put it on the Ultimaker Original (the fan shroud must be modified) or any of the Ultimaker family that has the Olsson Block mounted.

The optional Ultimaker 2+ Connect Air Manager gives you more confidence and setup flexibility. Designed to increase user safety, it removes up to 95% of ultrafine particles and shields users from hot and moving components.

For more air quality peace of mind, the Ultimaker 2+ Connect Air Manager includes a single-speed fan to efficiently pull air through a large EPA filter. This gives you the flexibility to install multiple printers in more locations.

The Ultimaker 2+ Connect Air Manager fully encloses the build chamber for a more stable printing environment and to prevent anyone from touching hot and moving components.

Key features

UFP filtering

Easy setup

Enhanced safety

This Flashforge FLEXIBLE filament is quite easy to print and is very consistent. It is a TPU filament and is extremely durable. The recommended printing temp range for this filament is 190 - 230 degrees C.

TPU (Thermoplastic polyurethane) is a type of flexible and elastic 3D printing filament. Its rubber-like elasticity, resilience, and durability make it suitable for uses requiring impact-absorption and a soft-touch surface.

Polycarbonate is known for its strength and durability. It has very high heat and impact resistance, which makes it a good choice for tough environments.

Colour: Natural
Filament Diameter: 1.75 mm
Filament Weight: 2.2 lbs (1 kg)
Printing Temperature: 240-260°C
Printing Speed: 60-90mm/s
Heated Bed Temperature: 100-120°C

Clean the hot-end and nozzle of your 3D printer with Dyna-Purge 3D Clean. Dyna-Purge 3D Clean is a non-chemical, non-abrasive, thermoplastic cleaning compound that is safe for both operators and 3D printers.

Available in 2.85mm diameter Dyna-Purge 3D Clean is specially developed by 3D-Fuel for 3D printers and is ready to use.

Packaging Information : 35 sticks (2.85mm) of Dyna-Purge 3D Clean plastic filament comes in a tube with a desiccant package to keep moisture away.

UltiMaker Black Tough PLA 3D printer filament is a versatile and high-quality material that can be used for a variety of applications. This filament is made of polylactic acid (PLA) that has been modified to increase its strength and durability. UltiMaker Tough PLA is designed to be used with Fused Deposition Modeling (FDM) 3D printers that have a 2.85mm filament diameter. It is known for producing high-quality prints that are both strong and lightweight.

The filament is easy to use and can be printed at a wide range of temperatures, making it a versatile option for a variety of 3D printing applications. UltiMaker Black Tough PLA also has high-temperature resistance and excellent layer bonding. It does not require a heated bed, which simplifies the printing process.

This filament is much stronger than standard PLA filaments, making it an excellent choice for creating functional prototypes and parts that need to withstand high stress or impact. The increased strength of this filament is due to the modifications made to the PLA base material.

UltiMaker Tough PLA is an easy-to-use filament that can be printed at a wide range of temperatures. This makes it a versatile option for a variety of 3D printing applications. The filament does not require a heated bed, which simplifies the printing process. It also has low warping, which helps to ensure that the prints come out smoothly.

The high-temperature resistance makes it an excellent choice for creating parts that need to be able to withstand high temperatures. The high-temperature resistance of this filament is due to the modifications made to the PLA base material. The result is a filament that produces high-quality prints that can withstand high temperatures.

UltiMaker Tough PLA has excellent layer bonding, which helps to ensure that the prints come out smooth and strong. The filament produces prints that are free from delamination or separation of the layers. This is due to the modifications made to the PLA base material, which result in a filament that produces high-quality prints with superior layer bonding.

Ultimaker White TPU 95A (thermoplastic polyurethane) filament a semi-flexible and chemical resistant material with strong layer bonding, well suited to printing parts requiring a blend of plastic and rubber, with some flexible properties.

Ultimaker White TPU 95A filament is 2.85mm in diameter and contains approx. 750g per spool. See compatible Ultimaker 3D printers and materials below.

Ultimaker TPU is an NFC spool.

Customize your Create+ 3D pen by swapping out the nozzle tip to achieve different textures. This set includes six unique nozzle tips: an ultrafine 0.5mm tip, a thicker 1.5mm tip, as well a Triangle, Ribbon, Noodle and Angled nozzle. The angled nozzle can also be used as a smoothing tool smoothing tool, allowing you to smooth your Doodles to perfection

Cool New Textures & Designs: Swap out between six different nozzle tips to customize your outcome.

Six New Tips: Includes an ultrafine 0.5mm tip, a thicker 1.5mm tip, as well as a Triangle, Ribbon, Noodle and Angled nozzle.

Make the Smoothest Doodles: The angled nozzle can also be used as a smoothing tool smoothing tool, allowing you to smooth your Doodles to perfection.

Nozzle Holder and Remover: Everything comes in a convenient storage case, that doubles as the tool you need to swap out nozzle tips!

Flashforge's PETG 1.75mm 1kg filament offers premium quality for 3D printing. It's strong, clear, and easy to use, suitable for a wide range of applications. With minimal odor and excellent printability, it's perfect for both beginners and experienced users. Get consistent and reliable prints with this high-quality PETG filament.

PETG stands for "Polyethylene Terephthalate Glycol." It is a type of thermoplastic polyester resin used in 3D printing and various other applications due to its strength, durability, and ease of use.

Flashforge Adventurer 5M Pro Nozzle 4 Pack (0.25, 0.4, 0.6 & 0.8) High Flow 32mm³/s Nozzle for Stable High-Speed Printing.

A 32mm³/s Nozzle with High Flow: This nozzle is great for squeezing out material, making it perfect for fast printing. It can heat up to 200°C in only 35 seconds and can go as high as 280°C. Plus, it's easy to remove – you can take it off in just 3 seconds with a simple button press, no tools needed.

Various Nozzle Choices: The Flashforge Adventurer 5M Series offers four nozzle sizes: 0.25mm, 0.4mm, 0.6mm, and 0.8mm. These options expand what your 3D printer can do, letting you customize your printing to suit specific needs and get the best possible results.

Unleash Precision: The 0.25mm nozzle brings a lot of benefits. It's perfect for creating accurate parts, models, and small objects because it offers high precision and can reproduce fine details. This nozzle produces smooth surfaces, minimizing visible lines and improving the texture of printed objects. It's also great at highlighting tiny details.

The 0.4mm nozzle is a popular choice for 3D printing because it strikes a good balance between versatility and performance. It's a common size that suits many different projects. This nozzle size manages to find the right mix between precision and speed, making it a practical pick for various uses.

Durable Options for Tough Filaments: The 0.6/0.8mm nozzles are made from strong materials that can handle abrasive filaments like carbon fiber. They are built to last and can endure prolonged use with these abrasive materials while still maintaining accurate dimensions. Because they have a longer lifespan, you won't need to replace them as often, which helps reduce your maintenance expenses.

Print Build Plate Replacement of Adventurer 5M/Pro.

The Flashforge Adventurer 5M Pro Steel Base Plate is a reliable replacement for the print build plate on your Adventurer 5M or 5M Pro 3D printer. This base plate offers improved stability and heat distribution for your 3D printing projects. It's designed to provide a level and secure printing surface, ensuring that your prints adhere well and maintain their dimensional accuracy.

Enhance your Creator 3 Pro 3D printer with this 2 x 0.4mm/ 2 x 0.6mm/ 2 x 0.8mm Hardened Nozzle Kit. Achieve precision and versatility in your 3D prints with this durable nozzle set.

The Adventurer 5M Pro Mainboard : Specifically designed to restore and enhance the performance of your 3D printer, providing optimal functionality and reliability for uninterrupted printing precision.

This adaptable build surface sheet is an authentic Flashforge consumable designed to seamlessly integrate with the Flashforge Adventurer 3 3D printer.

The printing surface plays a crucial role in FDM 3D printers, serving as the foundation upon which parts are created. Whether flexible or not, the build plate is responsible for transferring the heat generated by the hot bed, while the build sheet safeguards it from damage and ensures optimal adhesion.

Upgrade your printing experience with the Flashforge Adventurer 4 Base Plate. This essential component provides a stable foundation for your 3D printing projects, ensuring precise and reliable results with every print.