Isomars Acrylic Inks are specially formulated and pigmented inks with high viscosity for Paper Board, Canvas, Fabric and Wood. Non-Toxic Multi-purpose, comprehensive colour mixing, ready for immediate use, waterproof when dry ,lightfast and permanent. Accurate and easy dispensing with droppers dilutable, versatile and easy to use Magic Colour is ideal for Designers, Airbrush Artists, Illustrators, Fine Artists and Craft and Hobbyists.
Liquitex Airbrush Medium is specifically formulated to thin acrylic colours for airbrush application. Mixing colours with Airbrush Medium will ensure that the colours do not lose their flexibility, durability and adhesion. Airbrush nozzle size and spraying pressure (PSI) will determine the ratio of Airbrush Medium to paint mixture. Larger nozzles allow for greater amounts of paint in the mixture.
Keep airbrush wet during use, do not allow the paint to dry in airbrush. Clean airbrush with water, water/ammonia mixture, Liquitex Professional Acrylic Ink Pen Cleaner, airbrush cleaner or alcohol.
AIRBRUSH COMPRESSOR ARISM BY SPARMAX AC66-HX Lightweight but strong small compressor for easy transport. Since the compressor does not contain oil, transport in bags and suitcases is also unproblematic when travelling.
The compressor builds up its working pressure and stops automatically when its maximum pressure is reached. If air is removed from the compressor and the air pressure in the compressor falls below 25 PSI/1.7 bar, the compressor will start until it has reached its maximum pressure again.
The Sparmax ARISM compressor features:
Low maintenance, oil-lesssing lepiston air compressor
Working pressure from 0 psi to 35 psi
Auto on/off switch: 1.7/2.4 bar (25/35psi)
Airbrush bleed valve
Silver Bullet moisture trap
2M Braided hose
Detachable power cord ; plug
Air flow:13 - 15 lpm (0.46 - 0.53 cfm) at open flow
1/8BSPoutlet on compressor
Size: L19.2 x W12 x H18.5 cm (6.7" x 4.7" x 7.6")
Weight: 2.6 kgs (5.7 lbs)
Voltage: 220-240V 50Hz
Noise level: 49±dB
Duty cycle:40 minutes continuous use. After 40 minutes of continuous operation, use the On/Off Switch to turn off the unit. Allow the unit to cool for 10 - 15 minutes before turning the compressor back on.
The Sparmax ARISM compressor is suitable for these airbrushes and similar airbrushes, which have low air consumption:
Sparmax SP35 / SP35C
Sparmax MAX-3 / MAX-4
Iwata Custom Micron (with the air bleed valve open as the Micron has lower air consumption)
Iwata Kustom series(except K-TH)
Iwata HP-B, HP-B-Plus, HP-BH Hi-Line
Iwata HP-C, HP-C-Plus or HP-CH
Iwata Eclipse BS
Iwata Eclipse CS
Iwata Eclipse BCS
Iwata Revolution BR, M1
Iwata Revolution CR, M2
Iwata Revolution SAR, BCR
Neo for Iwata CN and BCN (with the air bleed valve open as the Neo has lower air consumption)