CABLES, CONNECTORS & LEADS

This 30cm servo extension cable has three 22-AWG wires joining a male Futaba J connector and a female JR connector. Since a female JR connector can be plugged into a male Futaba J connector, each end of the cable is compatible with both Futaba and JR-style connections; this cable will work as an extension cable in either system or as an adapter between systems, and it is compatible with almost all of the servos in the Kitronik range

The connectors have contacts on a 0.1" spacing, and each wire is comprised of 60 strands, making this cable more flexible than standard servo cables.

Features:

Compatible with all standard servo types including a Mini 180 degree servo.

Also compatible with a Mini 360 degree continous rotation servo.

Servo cable colour convention:

Brown or black = ground (GND, battery negative terminal).

Red = servo power (Vservo, battery positive terminal).

Orange, yellow, white, or blue = servo control signal line

This is a 4 pack of wires that are pre-terminated with an alligator (crocodile) clip on one end and a hookup pigtail (male jumper connector) on the other. Alligator clips are a staple part for any workbench and with these cables you will be able to easily incorporate those clips into a breadboard, development platform, or anything else that you would normally be able to attach a male jumper connector to.

Each Alligator Clip with Pigtail cable has a wire length of 30cm (that’s a little less than 1ft) and a male pin that easily inserts into a standard 0.1" connector. Each pack consists of two red cables and two black cables.

These connector wires can also be used to connect a BBC microbit to a prototyping board as an alternative to an edge connector.

Features:

Wires with a croc clip on one end and a male jumper cable connector (pigtail) on the other.

Enables you to connect a BBC microbit to a prototyping board as an alternative to using an edge connector.

Contents:

2 x Red alligator to male jumper connector leads.

2 x Black alligator to male jumper connector leads.

Dimensions:

Length: 30cm.

Industry standard 20-pole ribbon cable connector which mates with our box and latch headers. The multi-socket connection device forms an electrical connection with flat ribbon cable and is supplied complete with cable strain relief.

Provides a quick and simple interconnection system

With short polarising bump

Gold-plated brass contacts

Designed for use with ribbon cable

UL Approved.

Pitch

The Deltron 4mm Black Plug (550-0100) is a high-quality single-pole connector, designed for secure and reliable electrical connections. Featuring silver-plated brass contacts for excellent conductivity, this plug is equipped with a solder bucket connection and a durable stainless steel contact spring. Its barrel is made from tough, moulded acetal, ensuring long-lasting durability. With a 10A current rating, this plug is ideal for a variety of applications requiring dependable performance.

The Deltron 550/551 series offers premium 4mm single-pole plugs and panel-mounting sockets, ensuring reliable performance. Crafted with silver-plated brass contacts, these plugs are designed for superior conductivity, featuring a solder bucket connection and a robust stainless steel contact spring. The plugs have a durable moulded acetal barrel, while the sockets are also made from tough acetal and include a solder bucket connection. The panel cutout size is 8.1mm, and both the plugs and sockets are rated for 10A, making them ideal for various applications.

The Deltron 4mm Black Socket (551-0100) offers a premium solution for secure and dependable panel-mounting connections. Made with silver-plated brass contacts, it ensures excellent conductivity and long-lasting performance. The socket features a solder bucket connection for simple and effective wiring, while its durable acetal construction guarantees robustness in demanding environments. With a 10A current rating, this socket is suitable for various applications, providing reliable performance every time.

The Deltron 550/551 series offers premium 4mm single-pole plugs and panel-mounting sockets, ensuring reliable performance. Crafted with silver-plated brass contacts, these plugs are designed for superior conductivity, featuring a solder bucket connection and a robust stainless steel contact spring. The plugs have a durable moulded acetal barrel, while the sockets are also made from tough acetal and include a solder bucket connection. The panel cutout size is 8.1mm, and both the plugs and sockets are rated for 10A, making them ideal for various applications.

Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench itself. Whether you're just trying to make a few quick connections to test your circuit or having trouble making your multimeter leads stay where you need them, these spring-loaded clips are a workshop must-have.

Each lead in this pack of 3 is 35cm long with a rubber shrouded alligator clip in 45mm length and 8.3mm opening on each end. There are three different colours, you get each of: red, black and yellow.

This is 1.5m USB 2.0 Type A plug to mini B lead. It is suitable for both data transfer and charging/powering purposes.

The lead is compatible with a wide range of devices, such as certain brands of; digital camera, smartphones, hand held consoles or any other device that utilizes Type A plug to mini B type connections.

Features:

1.5 metre in length.

Type A plug to mini B lead.

It is suitable for Data transfer and charging/powering purposes.

Contents:

1 x 1.5m USB Type A plug to mini B plug lead.

Dimensions:

Length:1.5m.

Cable Diameter: 4.3mm.

These 4 pin dual female connectors are compatible with the Grove range of products. The plug into both the grove modules and grove compatible interfaces such as the Grove micro:bit interface.

It is supplied as a pack of 5 and each of the connector wires are 300mm in length.

Plug one end into a Grove module and the other into a Grove, or grove compatible, interface and you are ready to go, plug and play!

Note: The colours may vary from those displayed in the product images.

Features:

Compatible with all Grove products.

Supplied as a pack of 5.

Each is 300mm in length.

Contents:

1 x 5 Pack of 4 Pin Dual Female connectors.

Dimensions:

Length: 300mm.

These are 20cm long jumpers with female connectors on both ends. Use these to jumper from any male header on any board to any other female header. Multiple jumpers can be installed next to one another on a 0.1" (2.54mm) header.

Features:

Female to Female connectors.

20cm Long.

For use with breakout boards with a standard 0.1" (2.54mm) pin spacing.

1 x 40 pack F/F Jumpers (four of each colour).

These are 20cm long jumpers with male connectors on one end and female on the other. Use these to jumper from any male or female header on any board. Multiple jumpers can be installed next to one another on a 0.1" header.

Male to Female connectors

Pack of 40 x M/F Jumpers (four of each colour)

Length: 20cm (approx)

These are 20cm long jumpers with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Multiple jumpers can be installed next to one another on a 0.1" header.

Male to Male connectors

40 x M/M Jumpers (four of each colour)

Length: 20cm (approx)

If you have a standard servo and need to connect it to a board that accepts crocodile clip connections then our new servo to crocodile clip adapter cable is the accessory for you.

The adapter cable features 100mm colour coded cables terminating in a male servo connector at one end and colour coded 35mm croc clip at the other. The servo to crocodile clip adapter cable is ideal for connecting standard servos to the Kitronik Klip Motor Driver Board for microbit.

Features:

This adapter cable allows you to attach a standard servo to a board that accepts crocodile connections.

Colour coded 100mm leads and crocodile connector covers.

Ideal for use in robotics/Buggy projects.

Dimensions:

Length: 135mm.

1/0.6mm Solid Core tinned copper connecting wire supplied in 10-metre lengths. RoHS compliant and CE approved.

Features:

Solid core tinned copper wire.

Dimensions:

Outer Diameter: 1.2mm nominal.

Wire diameter: 0.6mm.

Length: 10m.

RoHS Compliant square, 36-way single-row pin, with 2.54mm spacing. They are suitable for our Kitronik Breakout Boards, as well as for programming applications, wire-wrapping, and connector applications.

The pin headers are compatible with other PCB interconnection systems that use jumper links. This strip can easily be cut down to any length required.

Features:

Insulator material: Glass filled polyester UL94VO.

Contact material: Copper alloy, Gold plated.

Contact rating: 3A.

Contents:

1 x Straight single row PCB pin headers, 2.54mm, 36-way.

A handy assortment of headers for Raspberry Pi, Arduino, and electronics projects. The Pimoroni Maker Essentials Various Headers pack includes the most common sizes you’ll need for prototyping, soldering, and custom builds.

The Pimoroni Maker Essentials Various Headers kit provides a convenient selection of male and female headers, ideal for use with Raspberry Pi, Arduino, micro:bit accessories, and general electronics projects.

Whether you’re soldering a HAT, connecting jumper wires, or building custom circuits, this pack ensures you always have the right connector on hand. Each header is standard 2.54mm pitch, suitable for breadboards and PCBs alike.

Perfect for classrooms, makerspaces, and anyone who regularly prototypes with microcontrollers or single-board computers.

This 1-metre USB power lead allows you to draw 5V power directly from a PC or USB power supply. It features pre-tinned red and black wires for easy connection to your circuit or project. The USB standard supports up to 100mA per connected device, making this lead suitable for powering LEDs or basic electronic circuits. It can also be used with a 5V 500mA mains power supply, making it ideal for powering static setups located near a wall socket.

Key Features:

Provides 5V power from a USB port for your electronics projects

Pre-tinned, colour-coded wires (red and black) for easy connection

Compatible with 5V 500mA mains adapters for fixed installations