All Categories
    Menu Close

    ElecFreaks Micro:bit Starter Kit

    Manufacturer: Elecfreaks
    ElecFreaks Micro:bit Starter Kit is designed for people who is at the door step of learning electric circuit and programming knowledge. The kit has provided some basic electronic components like LED, button, buzzer, temperature sensor , steering engine and motor etc.. Micro:bit Starter kit can help you enter a wonderful of electronic world.
    SKU: EF08179
    Availability: Out of stock
    i h
    Ship to
    Shipping Method
    Estimated Delivery
    No shipping options

    ELECFREAKS micro bit Starter Kit WIKI

    microbit makecode starter kit
    Products specifications
    Device TypeKits
    Customers who bought this item also bought
    Picture of Kitronik Yellow Wheels

    Kitronik Yellow Wheels

    KI 2593 TT
    If you have a robotics project or buggy featuring geared hobby motors, these 5 spoke injection moulded ABS wheels are the perfect wheel for the job! They fit directly onto the geared hobby motors TT style shaft and can be screw fixed firmly in place. The ABS used is very lightweight and has excellent mechanical qualities. As such, the wheels are extremely durable and very difficult to break. As they are made from ABS the wheels can be fully recycled.

    The wheels are supplied with rubber o-rings that when pushed onto the wheel act as tyres. When fitted, the o-rings will not come off accidentally. A concerted effort is required to remove them.

  • Sturdy 5 Spoke design.
  • Injection moulded with matte green ABS.
  • The ABS used is lightweight and has very good mechanical properties making them durable and difficult to break.
  • Supplied with rubber 0-rings that fit to the wheel and act as tyers.
  • Can also be used as a drive pulley for projects such as a ferris wheel or lazy Susan.
  • Push fit for TT shaft geared hobby motors. The wheel can then be screw fixed to the motor to ensure it stays in place.
  • The ABS wheel material is fully recyclable.

  • Contents:
  • 2 x Yellow 5 Spoke Injection Molded ABS Wheels.
  • 2 x Rubber O-Ring Tyres.

  • Wheel Dimensions:
  • Wheel Diameter (no tire): 63mm.
  • Wheel Diameter (with tire): 67.5mm.
  • Max Width:11.75mm.

  • €4.50
    Picture of Kitronik Protector Case for Microbit - V1 &V2

    Kitronik Protector Case for Microbit - V1 &V2

    KI 56102
    This Kitronik MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original Micro:bit V1and the new Micro:bit V2and continues in the traditions of our earlier cases. The cases are designed to keep the micro:bit safe, fully useable, and to offer the freedom of not being tethered to a computer.

    If a battery holder is attached to the back it can also can be stood neatly on a desk and it also features large and easy to read labels for the A and B buttons. This case provides full access to the bottom pins on the BBC micro:bit so the Edge Connector Breakout Board for the BBC Micro:bit can be used. One of the key features of the micro:bit is its physical size and this case has been designed with that in mind. It's as compact as we could make it, whilst still offering protection for the micro:bit.

    The case is also supplied with a sticky fixer pad so that you can attach a battery holder to the rear of the case, such as can be found in our BBC micro:bit Starter Kit. When a battery holder is used, micro:bit projects can go wherever you go. Even with a battery holder attached, the case is still palm-sized and portable.

    Note: This case requires assembly, full instructions can be found in the resources section below.

  • Provides excellent protection to the BBC micro:bit whilst allowing access to the bottom pins.
  • Full access to the A and B buttons on the BBC micro:bit.
  • Attach a battery cage to the rear of the case with the supplied sticky fixer.
  • Full access to pins and connections including the micro USB connector.
  • Clear case material shows the on-board LEDs in perfect clarity.
  • The case is compatible with versions 1 and 2 of the micro:bit.
  • When used in conjunction with a battery holder, micro:bit projects can be fully mobile.

  • Contents:
  • 4 x M3 Cheese Head Nylon Machine Screw.
  • 1 x Sticky Fixer Pad.
  • 4 x M3 Nylon Full Nut.
  • Laser-cut parts;
    -- 1 x Back Mounting Plate.
    -- 2 x Mid-layer Parts.
    -- 1 x Mid-layer Plate.
    -- 1 x Front Plate.

  • Dimensions:
  • Length: 65mm.
  • Width: 37mm.
  • Depth (without screws): 12mm.
  • Depth (with screws): 18.5mm.

  • €5.20
    Picture of Pavo A4 PVC Binding Clear Covers 150mic (Pack of 100)

    Pavo A4 PVC Binding Clear Covers 150mic (Pack of 100)

    PV 1401
    Clear Binding Covers A4 pk 100 150 micron
    Picture of Pavo PVC Clear Document Covers A3 200mic (Pack of 100)

    Pavo PVC Clear Document Covers A3 200mic (Pack of 100)

    PV 1407
    Pavo heavyweight PVC covers. Protects bound documents from dirt and damage, perfect for creating professional and organized presentations and binding projects.
    Front page remains visible through clear cover. Size: A3.
    Provides a premium, stylish and professional finish. Ideal for Slide bind, Wire bind, Comb bind and Coil binding.
  • Colour: Transparent
  • Thickness: 0.2 mm / 200 Microns
  • Pack of 100
  • €44.95