Flashforge AD5X Multi-Colour 3D Printer with IFS & Enclosed Chamber

The Flashforge Adventurer 5M Pro combines cutting-edge speed with intelligent design, offering a smooth and safe 3D printing experience for homes, classrooms, and offices. With a fully enclosed chamber, advanced filtration, and smart connectivity, this printer is built to perform efficiently—without compromising on quality or safety.

Key Features:

Lightning-Fast Printing:
Print larger projects in less time with speeds up to 600mm/s and acceleration up to 20,000mm/s². Ideal for rapid prototyping or multi-part builds.

High-Performance Nozzle:
A 280°C maximum nozzle temperature and 32mm³/s flow rate make it compatible with a range of materials, including PLA, PLA-CF, TPU, ASA, and ABS.

Safe Enclosed System:
The fully enclosed build chamber, combined with dual HEPA and activated carbon filters, captures over 99% of ultrafine particles and VOCs—keeping your workspace clean and safe.

Real-Time Monitoring:
A built-in HD camera lets you track progress remotely and create time-lapse videos for effortless project documentation and sharing.

Smart Device Management:
Control multiple printers through FlashMaker software. Centralised control streamlines workflows, especially in busy classrooms or maker labs.

Power-Loss Recovery:
In the event of a power cut, the printer automatically resumes from where it left off—no reprints, no wasted filament.

The Ultimaker S3 replaced the Ultimaker 3 from April 2020.  It can print an enormous range of materials including composites, engineering plastics and nylon. It is engineered to print continuously, with maximum uptime, reliably. No other Ultimaker 3D printer packs so much capability into such a cost-effective package 3D printing has long been synonymous with fabricating exceptional parts and models – but repeatability has always been a challenge. Not anymore.

Ultimaker has perfected first layer adhesion with the S3, which scans the build plate and corrects any microscopic discrepancies within the Z-height. The result is a perfect first layer for perfect adhesion and stability on the build plate. The S3’s build area is 230 x 190 x 200 mm which is down on the S5, but you have to remember this is a more compact 3D printer. It has an assembled size of 394 x 489 x 637 mm, which is around the same size as a laser jet. In other words, it’ll fit on a computer desk quite comfortably - filament tubes and all.

The S3 benefits from dual extrusion technology with Ultimaker swappable print cores, which enable you to easily switch between abrasive, non-abrasive and low and high-temp materials. The S3 is compatible with the complete Ultimaker material library, including TPU 95A, CPE+, Tough PLA, PVA and Breakaway. You can also print with glass and carbon fibre composites. All you need is the Print Core CC Red and you’ll be able to print up to 10kg of carbon fibre. Overall, the S3 is an outstanding 3D printer. It’s suitable for any application -- industrial or educational

This Flashforge FLEXIBLE filament is quite easy to print and is very consistent. It is a TPU filament and is extremely durable. The recommended printing temp range for this filament is 190 - 230 degrees C.

TPU (Thermoplastic polyurethane) is a type of flexible and elastic 3D printing filament. Its rubber-like elasticity, resilience, and durability make it suitable for uses requiring impact-absorption and a soft-touch surface.

This is a 0.5kg 1.75mm roll of PVA filament as made by Flashforge. This material is water soluble, making it absolutely invaluable as a support structure for 3D printers that work with multiple materials. Simply use this filament as the support material when printing an incredibly complicated 3D object, then place the object in water for 24 hours while occasionally agitating it to have the support structures simply melt away!

PVA filament is ideal for lower temperature printing, typically between 190-220 degrees, and doesn't require a heated bed. To prevent baking, it's crucial to set a high retraction value when not in use. It readily absorbs moisture, so store it in an airtight bag with the included silica gel sachet. These spools are compatible with most 3D printers due to their size. They work with 1.75mm printers but may need an external spool holder. Flashforge's upgraded formulation minimizes printing issues and allows longer storage without quality loss.

The Ultimaker S7 is a high-performance professional 3D printer designed for reliable, industrial-quality results. With automatic bed levelling, an enclosed build chamber, HEPA air filtration and a flexible build plate, the S7 delivers exceptional print accuracy with minimal setup. Perfect for engineering, education, product design and prototyping.

The Ultimaker S6 is the latest in professional 3D printing innovation—designed to maximise productivity, print quality, and reliability. Building on the trusted legacy of the S5, the S6 introduces a redesigned motion system, updated feeder module, swappable high-flow print cores, and a precision-engineered PEI-coated flexible steel build plate for effortless print removal and consistent alignment.

Engineered for speed and precision, the S6 reaches travel speeds of up to 500 mm/s and acceleration of 50,000 mm/s², delivering dimensional accuracy of ±0.15 mm or ±0.15%. Its dual extrusion system handles even complex material combinations with ease, while the active bed levelling system ensures a perfect first layer every time.

Designed for professionals, the S6 integrates seamlessly with UltiMaker Cura and UltiMaker Digital Factory, enabling streamlined workflows, remote print management, and scalable team collaboration. The robust build, low material waste, and advanced automation make it ideal for prototyping, manufacturing, and continuous production.