Sparmax Arism AC66 Compressor. Low maintenance, oil-lesssing lepiston air compressorWorking pressure from 0 psi to 35 psiAuto on/off switch: 1.7/2.4 bar (25/35psi)Airbrush bleed valveSilver Bullet moisture trap2M Braided hoseAirbrush holderDetachable power cord ; plugPressure gaugeAir flow:13 - 15 lpm (0.46 - 0.53 cfm) at open flow1/8BSPoutlet on compressorSize: L19.2 x W12 x H18.5 cm (6.7" x 4.7" x 7.6")Weight: 2.6 kgs (5.7 lbs)Voltage: 220-240V 50HzNoise level: 49±dBDuty cycle:40 minutes continuous use. After 40 minutes of continuous operation, use the On/Off Switch to turn off the unit. Allow the unit to cool for 10 - 15 minutes before turning the compressor back on.
AIRBRUSH COMPRESSOR ARISM BY SPARMAX AC66-HX Lightweight but strong small compressor for easy transport. Since the compressor does not contain oil, transport in bags and suitcases is also unproblematic when travelling.
The compressor builds up its working pressure and stops automatically when its maximum pressure is reached. If air is removed from the compressor and the air pressure in the compressor falls below 25 PSI/1.7 bar, the compressor will start until it has reached its maximum pressure again.
The Sparmax ARISM compressor features:
The Sparmax ARISM compressor is suitable for these airbrushes and similar airbrushes, which have low air consumption:Sparmax SP35 / SP35CSparmax MAX-3 / MAX-4Sparmax HB-040Iwata Custom Micron (with the air bleed valve open as the Micron has lower air consumption)Iwata Kustom series(except K-TH)Iwata HP-B, HP-B-Plus, HP-BH Hi-LineIwata HP-SB-PlusIwata HP-BC-PlusIwata HP-C, HP-C-Plus or HP-CHIwata Eclipse BSIwata Eclipse CSIwata Eclipse BCSIwata Revolution BR, M1Iwata Revolution CR, M2Iwata Revolution SAR, BCRNeo for Iwata CN and BCN (with the air bleed valve open as the Neo has lower air consumption)Premi Air G35Paasche TalonPaasche VJR