Menu
Search
Search store Close
Shopping cart Close

You have no items in your shopping cart.

All Categories
    Menu Close
    Picture of Kitronik Hamburger Mini Speaker- 3w Picture of Kitronik Hamburger Mini Speaker- 3w

    Sorry - this product is no longer available

    Kitronik Hamburger Mini Speaker- 3w

    Manufacturer: Kitronik
    Be the first to review this product
    The Hamburger Mini Speaker is a 3W economical speaker option for any project needing stand-alone sound with a small footprint.

    This is the ideal speaker choice for your microbit projects as it will work directly with the Audio cable for the BBC microbit.

    The Hamburger speaker features a built-in lithium-polymer battery for portable application, a 3.5mm stereo jack (sorry, iPhone 7 users) and two-volume options (quiet and loud) to control how loud your sound needs to be.

    Why call it the Hamburger? When you twist the top and bottom halves of the speaker in opposite directions, it expands out like an accordion extending the bass reflex portion. Each Hamburger Mini Speaker comes with a 1.5ft mini USB cable for recharging capabilities.

    Features:
  • Speaker: 3W (1KHz, THD10%) 36mm.
  • Frequency Response: 20Hz∽20KHz.
  • S/N ratio: ≥85dBA.
  • Built-in 3.7V 180mA LiPo battery.
  • 1-2 hour playtime.

    • Contents:
  • 1 x Hamburger Mini Speaker.
  • 1 x USB Mini-B Cable, 1.5ft..

    • Dimensions:
  • Width: 52mm.
  • Height: 38mm.

    • SKU: KI 3340
    Availability: Out of stock
    €11.96
    i h
    Ship to
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options

    Product Resources / Datasheet

    Datasheet.pdf_icon.gif

    Related products
    Picture of Kitronik MI: Sound Speaker Board for micro:bit

    Kitronik MI: Sound Speaker Board for micro:bit

    KI 5649-V2
    The MI:sound board is a speaker board for the BBC microbit. It features on-board; speaker, CR2032 battery holder, thumbwheel volume control and an easy access on/off switch. The MI:sound board can either be powered by the CR2032 battery (provided) or via the micro:bit USB or JST connections. It has been designed to work with micro:bit V1 and micro:bit V2.

    The speaker on MI:sound can be used in conjunction with the micro:bits onboard speaker or instead of. The micro:bit speaker can be turned off as there is a command/block for that in the MakeCode editor. Why would you want to? Volume! MI:sound's speaker is loud, and the potentiometer gives you control over its volume without the need to head back into the code. Super convenient!

    To use the MI:sound speaker board, the BBC micro:bit should be attached using the supplied bolts, spacers and nuts. Only Pin 0, 3V and GND need to be connected. Crocodile clips can also be used.

    When assembled, the MI:sound board is connected directly to the 3V, GND and P0 connections on the micro:bit. The 3V and GND connections provide power to the micro:bit and the built in buzzer is connected to P0, which is the default output pin when using the audio functions in the MakeCode software. The board has an easy to access on/off switch, which makes it easy to turn a project on and off.

    Like the MI:power board, MI:sound offers an elegant solution for micro:bit projects on the move. Both boards provide power to micro:bit, feature an on/off switch and allow you to output sound. Sound though is a much bigger feature on the MI:sound board. Where the MI:power board features a buzzer, MI:sound has an actual speaker with a thumbwheel volume control. Not only is the speaker more versatile than a simple sounder, it is also much much louder. So, in brief; the MI:power board is more compact and MI:sound is better for projects where sound is an integral part of the project.

    Features:
  • Power your BBC micro:bit from a stylish PCB.
  • It features an on-board speaker and it's loud!
  • There is a thumb wheel operated potentiometer volume control.
  • There is an onboard CR2032 battery holder.
  • The board features easy access on/off switch.
  • Designed to work with micro:bit V1 and micro:bit V2.

    • Contents:
  • 1 x MI:Sound speaker board for BBC micro:bit V2.
  • 3 x 12mm M3 Countersunk Screw.
  • 3 x M3 Steel Nuts.
  • 3 x Nylon Spacers.
  • 1 x CR2032 Coin Cell.


    • €9.50
    Picture of Kitronik Thin Speaker 0.25w 8ohm 40mm

    Kitronik Thin Speaker 0.25w 8ohm 40mm

    KI 3341
    This is the perfect speaker for projects that produce sound but where space is tight or where the speaker needs to be discreet. These speakers work well with the BBC microbit; you can code the microbit to play music or emit a beep as an alarm and this little speaker will do an admirable job.

    This a 0.25W, 8ohm speaker is only 40mm in diameter and just over 4mm thick making it very similar in size to those found in talking greeting cards, you could even design a microbit talking greeting card that has the built in micro:bit as a present as well as part of the card.

    Features:
  • 8ohm speaker that is ideal for use with the BBC microbit.
  • 4mm thick, making it ideal for use as a discreet speaker.

    • Contents:
  • 1 x 0.25W, 8ohm speaker.

    • Dimensions:
  • Diameter: 40mm.
  • Thickness: 4mm.

    • Requires:
  • Soldering Iron.
  • Solder.
    • €2.25
    Picture of Grove Buzzer

    Grove Buzzer

    KI 46159
    This simple yet effective Grove buzzer module is a standard board mounted piezo sounder. It can be added to a digital output and will emit a tone when the output is high. It can also be attached to an analogue pulse width modulation (PWM) output and can generate various tones and effects. It has an operating voltage of between 3.3V - 5V and the board is fitted with a standard Grove connector.

    Features:
  • Add sound to your Grove projects with this plug and play module.
  • A piezo buzzer module that can used with both digital and analogue outputs.
  • It has an operating voltage of between 3.3V - 5V.
  • The board featured a standard Grove connector.
  • Length: 24mm, width: 20mm, height: 9.8mm

    • Requires:
  • A Grove compatible interface.
  • A Grove compatible connector cable.
    • €3.95
    Picture of Kitronik Flat Profile Tact Switch

    Kitronik Flat Profile Tact Switch

    KI 3420
  • A low profile Miniature PCB Mount TACT Switch.
  • Single pole normally open contact.
  • Max voltage = 24V DC.
  • Max current = 50mA. L 6, W 6, H 4.3 mm.
  • L 6, W 6, H 4.3 mm.
  • This part is found in the Kitronik Inventors Kit
    • €0.50
    Picture of Kitronik Miniature Buzzer 6v 10 Pack

    Kitronik Miniature Buzzer 6v 10 Pack

    KI 3306
    These Miniature Buzzers are a low cost miniature transistor oscillator 6V buzzer with flying leads. They have a single-tone frequency of 400hz and a sound output of 75dB @ 200mm. They are rated for 4V - 8V (6V nominal) and a current of 25mA and the driver circuitry is built in. These buzzers are supplied as a pack of 10.

    The buzzer unit is L23mm x W17mm x H15.5mm, with fixing centres at 27.5mm, which gives a total length measurement of 33.5mm. The colour-coded (red & black) flying leads are 100mm. To ensure optimum performance and to protect the buzzer, ensure that the supply (e.g. batteries) is connected in the correct configuration.

    Features:
  • Low-cost miniature transistor oscillator 6V buzzer with 100mm flying leads.
  • They have a single-tone frequency of 400hz and a sound output of 75dB @ 200mm.
  • Driver circuitry is built in.
  • Rated for 4V - 8V (6V nominal) and a current of 25mA.
  • L23mm x W17mm x H15mm, with fixing centres at 27.5mm, which gives a total length measurement of 33.5mm.
  • Supplied as a pack of 10.

    • Dimensions:
  • Length: 23mm.
  • Width: 17mm.
  • Height: 15.5mm.
  • Fixing Centres: 27.5mm.
  • Total Length: 33.5mm.
    • €11.95
    Customers who bought this item also bought
    Picture of Kitronik STOP:bit Traffic Light for the BBC micro:bit

    Kitronik STOP:bit Traffic Light for the BBC micro:bit

    KI 5642
    The STOP:bit for the BBC micro:bit is the ultimate upgrade for traffic light/pedestrian crossing projects. Not only does it make coding the project a breeze, but the board is also supplied pre-assembled so you don't even need to fire up the soldering iron. Love it or hate it, variations of the pedestrian crossing project have been around for decades. When I did mine, it was on a 6502 EMMA board and coded with Assembly and it also included a level crossing. Thankfully, tapping low-level programming languages into a hexadecimal keypad is now a thing of the past. The Kitronik STOP:bit is a purpose-built accessory that can only lead to a more enjoyable project with a nicer looking end result.
    €4.94
    Picture of Kitronik Servo to Crocodile Clip Adapter Cable

    Kitronik Servo to Crocodile Clip Adapter Cable

    KI 4178
    If you have a standard servo and need to connect it to a board that accepts crocodile clip connections then our new servo to crocodile clip adapter cable is the accessory for you.

    The adapter cable features 100mm colour coded cables terminating in a male servo connector at one end and colour coded 35mm croc clip at the other. The servo to crocodile clip adapter cable is ideal for connecting standard servos to the Kitronik Klip Motor Driver Board for microbit.

    Features:
  • This adapter cable allows you to attach a standard servo to a board that accepts crocodile connections.
  • Colour coded 100mm leads and crocodile connector covers.
  • Ideal for use in robotics/Buggy projects.

    • Dimensions:
  • Length: 135mm.
    • €1.95
    Picture of ElecFreaks Alligator Cables

    ElecFreaks Alligator Cables

    EF10130
    Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench itself. Whether you're just trying to make a few quick connections to test your circuit or having trouble making your multimeter leads stay where you need them, these spring-loaded clips are a workshop must-have.

    Each lead in this pack of 3 is 35cm long with a rubber shrouded alligator clip in 45mm length and 8.3mm opening on each end. There are three different colours, you get each of: red, black and yellow.
    €1.65
    Picture of BBC micro:bit V2 Class Pack of 10

    BBC micro:bit V2 Class Pack of 10

    MIC 495
    Perfect for sharing the micro:bit with friends, the micro:bit club is a 10 pack containing all the pieces needed to enjoy micro:bit in STEM groups, coding clubs, school classes, scouts, guides and cubs or any other social gathering (contains 10 BBC micro:bits V2, 10x USB cables, 10 x battery holders ; 20x AAA batteries).

    The micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Measuring 4cm by 5cm, and designed to be fun and easy to use, users can create anything from games and animations to scrolling stories at school, at home and on the go - all you need is imagination and creativity.

    The micro:bit is completely programmable. That means each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer and Bluetooth Smart Technology. The micro:bit has a website full of coding languages, lesson plans, tutorials, and fun ideas to help you get creative

    For more information please see below

    €209.00
    Information
    My account
    Customer service
    Payment options
    Powered by nopCommerce
    Powered by Intact Software Ltd
    Copyright © 2025 SG Education Online. All rights reserved.