Menu
Search
Search store Close
Shopping cart Close

You have no items in your shopping cart.

All Categories
    Menu Close
    Picture of Kitronik Interface Board for microbit and fischertechnik
    Picture of Kitronik Interface Board for microbit and fischertechnik Picture of Kitronik Interface Board for microbit and fischertechnik Picture of Kitronik Interface Board for microbit and fischertechnik

    Kitronik Interface Board for microbit and fischertechnik

    Manufacturer: Kitronik
    Be the first to review this product
    The Kitronik Interface Board for BBC micro:bit and Fischertechnik bridges the gap between Fischertechnik STEM kits and the micro:bit, enabling control of motors and components. Powered by a 9V PP3 battery, it provides a regulated 3V supply for the micro:bit and includes a power switch. The board features Fischertechnik-compatible plugs, 2 I/O pins, motor connections, and status LEDs for troubleshooting. Custom MakeCode blocks and MicroPython code are included for easy integration.

    SKU: KI 5656
    Availability: 4 in stock
    €14.95
    i h
    Ship to
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options
    Related products
    Picture of FT Starter Set for Micro:bit

    FT Starter Set for Micro:bit

    FT 548884
  • Introduction to Robotics Programming: Ideal for beginners, especially at the primary level, to learn the basics of programming robots.
  • Primary Education Focus: Specifically designed for younger students to start their journey in coding and robotics.
  • Essential Requirements: Requires a micro
  • board, software, and a power supply (not included).


    • The fischertechnik Starter Set for micro:bit is the perfect introduction to programming for students in grade three and above. Designed to make the basics of coding with micro:bit single board computers accessible and easy to grasp, this comprehensive set includes everything needed to get started.

    With this kit, students can build three stationary models—a pedestrian signal, hand dryer, and barrier—that are equipped with actuators and sensors. The set also features the new fischertechnik "micro:bit IO F5 adapter," which provides 8 outputs and 6 inputs, enabling control of these simple yet effective demonstration models using the micro:bit board.

    To assist educators and students, a detailed pedagogical manual is available for free download from the fischertechnik eLearning portal. This manual includes setup instructions, a variety of engaging tasks, programming examples, and information on the micro:bit board, the fischertechnik IO adapter, and the Make Code software.

    The set contains 90 parts, including an XS motor, buttons, a photo transistor, LED lights, and a printed building manual. It also comes with a durable storage box that includes a cover sheet and a parts list, ensuring that everything stays organized. Didactic materials and additional resources are readily accessible online to support the learning experience.

    Key learning objectives:
  • Independently handling the first steps of robotic programming
  • Independently creating, changing, and applying short programs
  • Learning and applying basic robotic principles
  • Understanding the meaning and function of sensors and actuators
  • Getting familiar with topics like controlling, measurement and regulation
  • Working in groups and in different roles


    • Content:
  • micro:bit iO F5 adapter board
  • XS motor
  • 2x light barrier LEDs
  • phototransistor
  • 2x buttons
    • €195.00
    Picture of Kitronik Protector Case for micro:bit

    Kitronik Protector Case for micro:bit

    KI 56102
    This Kitronik MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original Micro:bit V1and the new Micro:bit V2and continues in the traditions of our earlier cases. The cases are designed to keep the micro:bit safe, fully useable, and to offer the freedom of not being tethered to a computer.

    If a battery holder is attached to the back it can also can be stood neatly on a desk and it also features large and easy to read labels for the A and B buttons. This case provides full access to the bottom pins on the BBC micro:bit so the Edge Connector Breakout Board for the BBC Micro:bit can be used. One of the key features of the micro:bit is its physical size and this case has been designed with that in mind. It's as compact as we could make it, whilst still offering protection for the micro:bit.

    The case is also supplied with a sticky fixer pad so that you can attach a battery holder to the rear of the case, such as can be found in our BBC micro:bit Starter Kit. When a battery holder is used, micro:bit projects can go wherever you go. Even with a battery holder attached, the case is still palm-sized and portable.

    Note: This case requires assembly, full instructions can be found in the resources section below.

    Features:
  • Provides excellent protection to the BBC micro:bit whilst allowing access to the bottom pins.
  • Full access to the A and B buttons on the BBC micro:bit.
  • Attach a battery cage to the rear of the case with the supplied sticky fixer.
  • Full access to pins and connections including the micro USB connector.
  • Clear case material shows the on-board LEDs in perfect clarity.
  • The case is compatible with versions 1 and 2 of the micro:bit.
  • When used in conjunction with a battery holder, micro:bit projects can be fully mobile.

    • Contents:
  • 4 x M3 Cheese Head Nylon Machine Screw.
  • 1 x Sticky Fixer Pad.
  • 4 x M3 Nylon Full Nut.
  • Laser-cut parts;
    -- 1 x Back Mounting Plate.
    -- 2 x Mid-layer Parts.
    -- 1 x Mid-layer Plate.
    -- 1 x Front Plate.

    • Dimensions:
  • Length: 65mm.
  • Width: 37mm.
  • Depth (without screws): 12mm.
  • Depth (with screws): 18.5mm.

    • €5.95
    Picture of Kitronik Discovery Kit for micro:bit

    Kitronik Discovery Kit for micro:bit

    KI 5666
    The Kitronik Discovery Kit for BBC microbit is a great way to get started with both programming and electronics. The Kit contains five experiments that start very simply, building up to simulating real world systems as confidence grows.

    The included booklet assumes no prior knowledge and contains detailed information about everything the new user will need to know. It covers everything from using a prototyping board to how to use the Microsoft MakeCode Editor, and everything in between. This is the ideal kit for someone who is new to the micro:bit, electronics, and coding.

    The kit contains five experiments and all of the components required to complete them. Each experiment has; a complete code walk-through, a circuit diagram and a top-down breadboard view, full explanations of what is happening, and how the electronics work.

    Note: No soldering is required and you can build your first circuit in minutes!

    Features:
  • This kit offers a great introduction to both coding and electronics.
  • No soldering required - build your first circuit in minutes!
  • Make the 5 experiments in the step-by-step tutorial book and learn as you go.
  • All parts are included to conduct the 5 experiments.
  • Once you have completed all of the included experiments, you have the perfect prototyping system for further adventures with the micro:bit.
  • The code can be created in Microsoft's easy to use MakeCode editor.

    • Contents:
  • 1 x Breadboard breakout for the BBC micro:bit.
  • 1 x Small Prototype Breadboard.
  • 2 x Red 10mm LED.
  • 2 x Yellow 10mm LED.
  • 2 x Green 10mm LED.
  • 10 x 330Ω Resistor.
  • 1 x Piezo Element Buzzer.
  • 10 x Male to Male Jumper Wires.
  • The included experiments are;

    • -- LED Control Circuit.
    -- Buzzer Jukebox.
    -- Lights in sequence.
    -- Digital LED Thermometer.
    -- Traffic light with pedestrian crossing.
    €15.95
    Picture of Kitronik :GAME Controller for micro:bit

    Kitronik :GAME Controller for micro:bit

    KI 5644
    The Kitronik :GAME Controller for the BBC micro:bit is a retro gaming accessory for the BBC microbit. It is a programmable gamepad-style controller enabling a better gaming experience on the micro:bit itself, or the ability to control other devices over micro:bit radio.

    The :GAME Controller is similar in design and features to the the :GAME ZIP 64, only without the ZIP LED screen. This offers great value if the micro:bits own LED matrix is sufficient for the game or when it will be used to control other devices such as robots and buggies. It will also be much lighter on power consumption than its larger/older sibling.

    It features on-board sound, 4 x directional buttons, 2 fire buttons, haptic feedback, and breakout points so shoulder buttons can be added. All of these features are fully programmable. The board is powered by two AA batteries, which also power the attached micro:bit.

    The micro:bit connects to the board via the Edge Connector on the :GAME Controller. The micro:bit should be inserted firmly into the edge connector, ensuring that the micro:bit LED display is facing in the same direction as the front of the :GAME Controller.

    Note: Care should be taken when using the external breakouts for pins 19 and 20 as GPIOs, as this can cause issues with the I2C devices on the micro:bit itself (e.g. compass and accelerometer). The BBC microbit is NOT included.

    Features:
  • A hand-held gaming solution for the BBC micro:bit.
  • Fully programmable on-board sound, directional buttons, fire buttons, and haptic feedback.
  • Breakout pads for adding shoulder buttons.
  • Ergonomic design for comfortable game-play.
  • It can also be coded to be a controller for your buggy or robotics projects.
  • We have created custom code blocks for the MakeCode Editor that are available as an Extension to the editor.
  • The board features an on/off switch to power the board on/off or to act as a reset if the :GAME Controller is in an enclosure where the micro:bits own reset switch cannot be accessed.

    • Contents:
  • 1 x :GAME Controller for the BBC microbit.

    • Dimensions:
  • Length: 155mm.
  • Width: 60mm.
  • Center Width: 30.5mm.


    • Requires:
  • 2 x AA Batteries.
  • BBC micro:bit.
  • Type-A to Micro-B USB Cable.
  • MakeCode Editor.
    • €21.95
    Picture of FT First Coding

    FT First Coding

    FT 560843
  • Ideal starter set for exploring computer science and robotics
  • Includes pre-installed motors and sensors within the model
  • User-friendly graphical programming interface with pre-built examples


    • Creating your own program and bringing a robot to life is an incredibly engaging and thrilling experience. In today’s tech-driven world, understanding this technology is vital. The fischertechnik Early Coding building set is the perfect tool to introduce young learners to the exciting field of IT and robotics. With pre-assembled components, children can dive into the world of coding and robotics in a fun and inspiring way. The set includes two motors and sensors fully integrated into a single block, making it easy to get started. Simply power on, connect via Bluetooth to a mobile device, and begin exploring! The user-friendly graphical programming interface, complete with pre-designed examples, is tailored to be age-appropriate, providing the ideal introduction to robotics. Students can also easily create their own programs using the provided software.



    Functionality:
  • First Coding App
  • Bluetooth control
  • Learn programming
    • €170.00
    From the same category
    Picture of FT STEM Power Set 300 (for 574817 & 574721)

    FT STEM Power Set 300 (for 574817 & 574721)

    FT 574818
    fischertechnik STEM Power Set 300 (for 574817 & 574721)

    Only use the charging cable provided by fischertechnik. In case of a short circuit, the 9V Li-Ion battery automatically shuts off for safety reasons. To reactivate it, it must be briefly charged with a charger via the USB-C port. After that, the full voltage will be available again. Output voltage: 9V DC, Charging voltage: 5V, Charging current: 300-400 mA.

    €24.50
    Picture of FT TXT Controller 4.0

    FT TXT Controller 4.0

    FT 560166

    Introducing the Fischertechnik TXT Controller 4.0, packed with cutting-edge features for advanced robotics and automation projects. With 512 MB of RAM and 4 GB of eMMC storage, this controller is equipped with three servo outputs and a responsive capacitive touch display that supports gesture control. The enhanced WiFi and Bluetooth module provides versatile wireless connectivity for a wide range of applications.



    The USB host port allows you to connect devices like the Fischertechnik USB camera or USB sticks. You can link up to eight additional controllers as extensions, making it perfect for complex setups. The compact, slim design (90x90x17.5mm) ensures seamless integration into your models.



    Firmware updates are automatically downloaded via the cloud, ensuring your models remain up-to-date while preserving custom programs. The TXT 4.0 supports graphic programming with ROBO Pro Coding and Python, and it's compatible with various operating systems, including mobile devices.



    Key Features:
  • Processor: Arm® dual Cortex®-A7 650 MHz + Cortex®-M4
  • Memory: 512 MB DDR3 RAM, 4 GB eMMC, expandable via Micro SD card
  • Display: 2.4” capacitive color touch display (320x240 pixels)
  • Inputs/Outputs: 8 universal inputs, 4 quick counter inputs, 4 motor outputs, 3 servo outputs
  • Wireless: Bluetooth 5.0, Dual-band WiFi (2.4 GHz & 5 GHz)
  • Connectivity: USB 2.0 client, USB-A host port, 2x 6-pole connector strips, I²C interface
  • Operating System: Linux-based, open-source, with automatic cloud-based firmware updates
  • Programming: ROBO Pro Coding (graphic and Python), REST interface, additional options available


    • Power the controller via a 9V DC port or Fischertechnik’s 2.5 mm ports, and expand your capabilities with the included USB and 6-pole expansion cables. The Fischertechnik TXT Controller 4.0 is your ultimate tool for innovative and scalable robotics projects.



    Content:
  • TXT 4.0 Controller
  • Mini USB cable
  • Extension cable 6-pole


    • >Functionality:
  • Processor 650 MHz
  • Memory 512 MB RAM, 4 GB eMMC
  • Capacitive touch display
    • €450.00
    Picture of FT Arduino UNO F5 Adapter

    FT Arduino UNO F5 Adapter

    FT 179450

    The Uno-F5-Shield is a fischertechnik adapter for the Arduino UNO microcontroller.

    €36.90
    Picture of FT Micro:bit F5 Adaptor

    FT Micro:bit F5 Adaptor

    FT 171850

    Successfully control and program fischertechnik models with fischertechnik sensors. All about fischertechnik sensors!

    €49.00
    Picture of FT Arduino MEGA F5 Adapter

    FT Arduino MEGA F5 Adapter

    FT 179449
    Enhance your fischertechnik projects with the Arduino MEGA F5 Adapter, enabling smooth integration with the Arduino MEGA platform. Perfect for advanced robotics and automation projects, this adapter allows for greater control and innovation in STEM education and hobbyist builds.
    €49.00
    Picture of FT Raspberry P1 F5 Adapter

    FT Raspberry P1 F5 Adapter

    FT 179448

    Ideal for advanced robotics and programming projects, this adapter enhances your ability to create innovative and educational builds, perfect for STEM learning and hobbyist experimentation.

    €60.00
    Picture of FT LED Set

    FT LED Set

    FT 533877

    The LED Set is just the right solution for more light! The construction sets can now be upgraded even further with more luster and additional light effects. The set contains two Rainbow LED´s that flash in different colors and frequencies, together with two white LED´s and a battery holder.

    €45.00
    Picture of FT Motor Set XS

    FT Motor Set XS

    FT 505281

    The Fischertechnik Motor Set XS is designed for versatility with its compact size, making it easy to integrate into a variety of models. The set includes not only the motor but also essential components such as building blocks, gearbox parts, and toothed gears. Additionally, it features a safety battery holder with an integrated pole-reversing switch, suitable for a 9V block (battery not included).



    Performance Specifications:
  • Voltage: 9V
  • Maximum Output: 1.0 W at 6000 RPM
    • €45.00
    Picture of FT Accu Set 220v

    FT Accu Set 220v

    FT 34969

    The Fischertechnik Accu Set 220V features a microcontroller-controlled charger that ensures reliable protection against overcharging. With a maximum charging time of just two hours, this set includes a powerful NiMH rechargeable battery pack equipped with a fuse to safeguard against short circuits. Specifications: 8.4V, 1500mAh.

    €69.00
    Picture of FT Power Set 220v

    FT Power Set 220v

    FT 505283

    The Fischertechnik Power Set 220V provides a reliable power supply and a stepless power controller for all your Fischertechnik models. The power supply unit delivers a stable voltage of 9V/2.5A, while the power controller offers adjustable output up to 1A. An additional output provides 9V/1A max (not adjustable). Both outputs are short-circuit-proof and feature overload protection for enhanced safety.

    €79.95
    Information
    My account
    Customer service
    Payment options
    Powered by nopCommerce
    Copyright © 2025 SG Education Online. All rights reserved.