LASER CRAFT SURFACES

These Colorado Brown Laserable Faux Leather Savana sheets, measuring 600mm x 300mm, are perfect for expanding the finishing options for any maker. They are a rustic brown colour, two-tone, and have a distressed look that is soft to the touch and very leather-like. This material is suitable for a laser cutter.

As this material can be cut with a laser, it can easily be cut to any size or shape required. It can be used for a wide variety of applications, such as; seating/upholstery or adding a unique and striking finish to a project. It could also be used for labels, keyrings, or tags, as shown in the product photos. The faux leather can then either be sewn, stuck, or pinned into place in much the same way as leather can.

If this material is to be used for seating covers it is going to be susceptible to getting dirty. Any loose dirt can easily be hoovered or gently dusted with a cloth. Care should be taken as excessive abrasion can mar the material. Wet stains should be dealt with immediately, by mopping up any liquid with a lint-free cloth. If further cleaning is required, clean with neutral soap and water using smooth, circular movements. Then, rinse with water.

This material is safe for indoor use as it is fire retardant to contract level Crib5 as standard and also passes the IMO 8 marine fire standard for indoor seating.

Note:

Faux Leather is a man-made product and therefore, repeat patterns may be noticeable within the product.

Colour variations can occur from batch to batch.

If you have any concerns about the suitability of this product, please contact our customer services team who will be happy to help you assess its suitability for your needs.

Features:

Brown Laserable Faux Leather Savana sheets, measuring 600mm x 300mm.

They are a rustic brown colour, two-tone, and have a distressed look that is soft to the touch and very leather-like.

Suitable for a laser cutter.

It can be used for a wide variety of applications, such as; seating/upholstery or adding a unique and striking finish to a project.

Can be gently dusted, hoovered, and cleaned with warm neutral soapy water.

These sheets are compliant with the following; REACH, OEKO-TEX, Crib 5, and IMO Part 8. They are also fire retardant and are rated as resistant to cigarettes and matches.

Add a touch of class and sophistication to your beverage consumption with these round shaped slate coasters. Not only do they look stylish and sleek, but they are also durable, practical, and will protect your surfaces from heat and liquids. Although stone/slate cannot be cut with a CO2 laser, they can be laser engraved for that personal touch. They can easily be cleaned with warm water, with a touch of detergent if heavily soiled, and they are as good as new. Supplied as a pack of 4.

These stylish round-shaped coasters will look great in any location.

They are durable, practical, and resistant to scratching and staining.

Protect your tables and surfaces from heat/liquid damage.

Personalise them with CO2 laser engraving, a coat of lacquer will help improve the contrast.

They can easily be wiped clean with warm water, or warm water mixed with a small amount of mild detergent.

The perfect gift for someone special!

If they fade over time they can easily be brought back to life with a little olive oil.

An even coat of lacquer can have a dramatic positive effect on their look.

Length: 100mm (Nominal).

Width: 100mm (Nominal).

Thickness: 5mm (Nominal

These stylish high quality natural rough-cut vertical slate signs, measuring 200mm x 150mm, look great hanging in a window, on a wall or anywhere else you might care to put up a sign. Not only do they look stylish and sleek, but they are also durable, and practical, and will naturally draw the eye wherever they are put. Although stone/slate cannot be cut with a CO2 laser, they can be laser engraved, which makes for a unique long-term sign. They can also be written on with chalk for information of a more temporary nature, when done just give them a wipe with warm water, with a touch of detergent if heavily soiled, and they are as good as new. Supplied as a pack of 1.

Made from natural slate these stylish signs will maintain their look long-term, but if they do start to fade with age, they can be brought back to life with a little olive oil. Alternatively, a coat of lacquer can really make a difference to the hue, though we are still determining if this will make use with chalk less than perfect. A coat of lacquer, prior to laser engraving, will also help to improve the contrast of the laser engraving.

These stylish high-quality natural rough-cut vertical slate signs will look great in any location.

They are durable, practical, and resistant to scratching and staining.

Personalise them with CO2 laser engraving, a coat of lacquer will help improve the contrast.

They can easily be wiped clean with warm water, or warm water mixed with a small amount of mild detergent.

The perfect gift for someone special!

If they fade over time they can easily be brought back to life with a little olive oil.

An even coat of lacquer can have a dramatic positive effect on their look.

1 x Rough Cut Laser Engraving Slate Signs - with holes 200mm x 150mm.

These stylish high quality natural rough-cut Horizontal slate signs look great hanging in a window, on a wall or anywhere else you might care to put up a sign. Not only do they look stylish and sleek, but they are also durable, practical, and will naturally draw the eye wherever they are put. Although stone/slate cannot be cut with a CO2 laser, they can be laser engraved, which makes for a unique long-term sign. They can also be written on with chalk for information of a more temporary nature, when done just give them a wipe with warm water, with a touch of detergent if heavily soiled, and they are as good as new. Supplied as a single unit.

These stylish high-quality natural rough-cut Horizontal slate signs will look great in any location.

They are durable, practical, and resistant to scratching and staining.

Personalise them with CO2 laser engraving, a coat of lacquer will help improve the contrast.

They can easily be wiped clean with warm water, or warm water mixed with a small amount of mild detergent.

The perfect gift for someone special!

If they fade over time they can easily be brought back to life with a little olive oil.

An even coat of lacquer can have a dramatic positive effect on their look.

Width: 300mm (Nominal).

Length: 120mm (Nominal).

Thickness: 5mm (Nominal).

Add a touch of class and sophistication to your beverage consumption with these square-shaped slate coasters. Not only do they look stylish and sleek, but they are also durable, practical, and will protect your surfaces from heat and liquids. Although stone/slate cannot be cut with a CO2 laser, they can be laser engraved for that personal touch. They can easily be cleaned with warm water, with a touch of detergent if heavily soiled, and they are as good as new. Supplied as a pack of 4.

These stylish square-shaped coasters will look great in any location.

They are durable, practical, and resistant to scratching and staining.

Protect your tables and surfaces from heat/liquid damage.

Personalise them with CO2 laser engraving, a coat of lacquer will help improve the contrast.

They can easily be wiped clean with warm water, or warm water mixed with a small amount of mild detergent.

The perfect gift for someone special!

If they fade over time they can easily be brought back to life with a little olive oil.

An even coat of lacquer can have a dramatic positive effect on their look.

Length: 100mm (Nominal).

Width: 100mm (Nominal).

Thickness: 5mm (Nominal).

Wood slab with bark edge. Suspension cord mounted

Size 12-14cm

Thickens - 1.5cm

Material: Poplar Wood