Mayku Vaccum Former

The Creator 3 Pro is our preferred dual extruder 3D printing system for schools, hobbyists and small enterprises.

Optimised for high-demand engineering materials and ensure smooth extrusion of these materials. Levelling sensors are reconfigured for higher accuracy with updated components. The Creator 3 Pro now greatly improves the build platform's temperature heat-up speed. This provides a much quicker turnaround time for a job print.

FlashForge Creator 3 Pro is your new desktop workhorse.

The Flashforge Adventurer 4, is the perfect printer for schools. It supports large volume printing, auto leveling, and supports multiple-machines controlled to one computer, catering for printing needs of hobbyists, small businesses and schools

The printer is ready to use out of the box and is supplied with a 1kg PLA filament spool in the box allowing using to get started quickly. An improved nozzle swap functionality allows user to swap nozzles without having to power down the unit.

This demo model was primarily reserved for internal use by our staff and occasional presentations at conferences, with limited external usage.

A new level of 3D printing success!! Ultimaker took everything customers loved about the award-winning UltiMaker S5... And made it even better. The S7 is packed full of our latest technology, making it easier than ever to 3D print high-quality parts.

With Integrated Air Manager, not only does this increase air quality peace of mind... It also boosts print quality thanks to its fully enclosed build chamber and single glass door.

Flexible build plate, skip using glue and remove parts effortlessly with the PEI-coated flexible build plate. Its patent-pending design uses 25 magnets and 4 pins for perfect alignment – reducing the time spent using the S7 and increasing productivity.

Inductive build plate sensor, a new inductive print head sensor probes the build plate with less noise and more accuracy. And automatic tilt compensation removes the need for thumbscrew bed calibration. Together, these allow you to start a print and walk away – confident in a perfect first layer.

The Ultimaker S5 is built to run continuously and maximize uptime. Its best-in-class technical specifications deliver performance you can rely on.

Designed for your success, the Ultimaker S5 is part of the complete Ultimaker 3D printing solution – one trusted by hundreds of thousands of professionals worldwide.

Large build volume: 330 x 240 x 300 mm (13 x 9.4 x 11.8 inches)

Assembled Dimensions:   495 x 585 x 780 mm (19.5 x 23 x 30.7 inches)

Compatible with high-strength glass and carbon fiber filament

Down to 20 micron (0.001 inch) layer resolution

Open filament system – print with any 2.85 mm material

4.7-inch touchscreen interface – Winner of iF Design Award 2019

Weight: 20.6 kg (45.4 lbs)

The UltiMaker 2+ Connect 3D Printer with networking capabilities and a new touchscreen is your reliable first step into a world of easy, remote 3D printing.

Simply unbox and connect three components, and get started. This speedy setup even makes installing multiple 3D printers effortless.

Features and Benefits:
Network connectivity:Via Wi-Fi or Ethernet, print remotely over the cloud with added security
Easy setup: Install the printer in minutes, and benefit from improved ergonomics and assisted bed leveling
Next-gen components: A stiffer build platform and rigorously tested material profiles ensure reliable printing
Touchscreen: For every action, the 2.4” color touchscreen gives you intuitive control and assistance
Easy maintenance: A clean and updated design keeps maintenance needs to around 20 minutes per month
Wide material choice: With our open filament system, you can always find the right material

The Ultimaker S3 replaced the Ultimaker 3 from April 2020.  It can print an enormous range of materials including composites, engineering plastics and nylon. It is engineered to print continuously, with maximum uptime, reliably. No other Ultimaker 3D printer packs so much capability into such a cost-effective package 3D printing has long been synonymous with fabricating exceptional parts and models – but repeatability has always been a challenge. Not anymore.

Ultimaker has perfected first layer adhesion with the S3, which scans the build plate and corrects any microscopic discrepancies within the Z-height. The result is a perfect first layer for perfect adhesion and stability on the build plate. The S3’s build area is 230 x 190 x 200 mm which is down on the S5, but you have to remember this is a more compact 3D printer. It has an assembled size of 394 x 489 x 637 mm, which is around the same size as a laser jet. In other words, it’ll fit on a computer desk quite comfortably - filament tubes and all.

The S3 benefits from dual extrusion technology with Ultimaker swappable print cores, which enable you to easily switch between abrasive, non-abrasive and low and high-temp materials. The S3 is compatible with the complete Ultimaker material library, including TPU 95A, CPE+, Tough PLA, PVA and Breakaway. You can also print with glass and carbon fibre composites. All you need is the Print Core CC Red and you’ll be able to print up to 10kg of carbon fibre. Overall, the S3 is an outstanding 3D printer. It’s suitable for any application -- industrial or educational

Explore a new range of metal 3D printing applications by upgrading the Ultimaker S5 with the Metal Expansion Kit. Its simple workflow makes creating stainless steel parts easier, more efficient, and affordable. The Ultimaker metal expansion kit provides access to software optimizations, post-processing services, and extensive e-learning modules. Comparing the Ultimaker S5 and metal expansion kit to CNC and other additive methods, user can save up to 90% creating the metal tools and parts user need.

An end-to-end metal 3D printing workflow

Design and print high-quality steel parts

Metal parts. up to 90% cheaper

Simply swap materials and change out the print cores for more versatility and potential applications

Being able to 3D print either plastic or metal on the Ultimaker S5 opens up a wider range of potential applications. And because you can quickly and easily switch between materials by changing out the print cores, your printer becomes even more versatile.

The Ultimaker Metal Expansion Kit includes:

BASF Forward AM Ultrafuse® 17-4 PH (1 kg)

BASF Forward AM Ultrafuse® Support Layer (300 g)²

Packaging for green parts and a voucher toward post-processing*

Ultimaker Print Core CC 0.4

Ultimaker Print Core DD 0.4³

Magigoo Pro Metal (50 ml) adhesive

Free Ultimaker Cura software with optimized metal part slicing features

Access to exclusive metal FFF e-learning content on Ultimaker Academy

Snapmaker 2.0 A350T Modular 3-in-1 3D Printer & Enclosure Bundle

The Snapmaker 2.0 A350T 3-in-1 modular system is powerful and customisable, featuring everything you need to start your maker journey. 3D Printing, CNC and laser modules make the Snapmaker A350T a perfect machine for every maker.

This enclosure bundle means you get the added benefits of reduced fumes and even more reduced noise! With add-ons such as the air purifier you can ensure you A350T is safe for any environment.