New products

The fun way for kids to start maths! Here’s SumStart, the simple, fun way to introduce counting and computation to give your child the head start in maths.

Simple, Child & Eco Friendly
Here is a simple, child & Eco friendly board which facilitates counting, addition, subtraction and multiplication. It gives the child the opportunity to fill in the empty slots on the board with the correct numbered piece, a child cannot get it wrong thus builds confidence in their mathematical ability.

Ideal For Individual Learning
SumStart is ideal for individual learning, collaboration learning and station teaching, it enables the child to develop, practice and consolidate a range of skills in mathematic that develops conceptual understanding through pictorial representation.

Quick Way To Perform Assessment
Educators know how important it is for your child to get the best possible start with numbers, Sumstart promotes mental maths skills, estimating skills and is an early introduction into problem solving skills. Teachers, Sumstart is a quick way to perform assessment for learning and assessment of learning while also focusing on covering the number strand in the curriculum.

Urban Sketching Set of 12 x2.5ml set is formed of colours ideal for urban sketches. Most of the colours in the set are mono-pigmented, which allows you to create pure shades when mixed. The maximum level of light fastness of colours of a set guarantees the preservation of artworks over time.

ROSA Gallery Fine Art Watercolour Paints are made of organic gum arabic and premium finely ground organic and inorganic pigments. The majority of the colours being single pigment enable us to obtain numerous amazing pure shades when the colours are mixed.

ROSA Gallery Artists’ Watercolours give the artists opportunity to apply various art techniques.

Organic gum arabic provides perfect adhesion and even colour flow

High-quality organic and inorganic pigments guarantee purity and transparency of each colours;

High pigment concentration supplies the artists with a wide range of colours: from airy transparent to full opaque;

Natural drying providing easy dilution and brushing properties.

Paints in the set: 704 Titanium White, 731 Cadmium Yellow Light, 740 Bright Red, 709 Magenta Rose, 711 Green, 712 Emerald Green, 716 Cobalt Blue, 715 Ultramarine, 719 Yellow Ochre, 753 Royal Brown, 720 Sepia, 724 Neutral black.

Elevate your designs with Ador's Print Module! Seamlessly compatible with CMYK eco solvent, it adds a pop of vibrant colour to your designs.

You can use the Printing module for your Ador in 3 different ways:

Single colour (300DPI)

Blended colour (150 PDI)

Gradient (150 DPI)

Choose one or multiple colours: (these are not included and need to be purchased separately)

Cyan

Magenta

Yellow

Black

The Flux Ador is the world's first laser cutter with a print module! This is the ink for the Flux Ador diode laser cutter in the colour Yellow.

The Ador color printer laser cutter is designed for ease of use, ideal for beginners and people who want to both laser cut and add colour to their object.

Compatible materials:

Wood - For porous materials a primer must be used

Bamboo - For porous material, a primer must be used

Cork - For porous material, a primer must be used

Board

Fabric - Beware the material is not washable

Canvas

Flat stone

Polycarbonate - Adhesion may be limited on glossy surfaces

Stainless steel - Adhesion may be limited on glossy surfaces

Glossy leather - Adhesion may be limited on glossy surfaces

Acrylic - Adhesion may be limited on glossy surfaces

The Flux Ador is the world's first laser cutter with a print module! This is the ink for the Flux Ador diode laser cutter in the colour Cyan.

The Ador color printer laser cutter is designed for ease of use, ideal for beginners and people who want to both laser cut and add colour to their object.

Compatible materials:

Wood - For porous materials a primer must be used

Bamboo - For porous material, a primer must be used

Cork - For porous material, a primer must be used

Board

Fabric - Beware the material is not washable

Canvas

Flat stone

Polycarbonate - Adhesion may be limited on glossy surfaces

Stainless steel - Adhesion may be limited on glossy surfaces

Glossy leather - Adhesion may be limited on glossy surfaces

Acrylic - Adhesion may be limited on glossy surfaces

The Flux Ador is the world's first laser cutter with a print module! This is the ink for the Flux Ador diode laser cutter in the colour Magenta.

The Ador color printer laser cutter is designed for ease of use, ideal for beginners and people who want to both laser cut and add colour to their object.

Compatible materials:

Wood - For porous materials a primer must be used

Bamboo - For porous material, a primer must be used

Cork - For porous material, a primer must be used

Board

Fabric - Beware the material is not washable

Canvas

Flat stone

Polycarbonate - Adhesion may be limited on glossy surfaces

Stainless steel - Adhesion may be limited on glossy surfaces

Glossy leather - Adhesion may be limited on glossy surfaces

Acrylic - Adhesion may be limited on glossy surfaces

The Flux Ador is the world's first laser cutter with a print module! This is the ink for the Flux Ador diode laser cutter in the colour Black.

The Ador color printer laser cutter is designed for ease of use, ideal for beginners and people who want to both laser cut and add colour to their object.

Compatible materials:

Wood - For porous materials a primer must be used

Bamboo - For porous material, a primer must be used

Cork - For porous material, a primer must be used

Board

Fabric - Beware the material is not washable

Canvas

Flat stone

Polycarbonate - Adhesion may be limited on glossy surfaces

Stainless steel - Adhesion may be limited on glossy surfaces

Glossy leather - Adhesion may be limited on glossy surfaces

Acrylic - Adhesion may be limited on glossy surfaces

The Ador 2 W Infrared Laser module where you can engrave on metal and metal like materials with ease.

Compatible materials:

Gold

Copper

Brass

Titanium

Stainless steel

Aluminium

Black acrylic

Silver

Iron

The Flux Ador is the world's first laser cutter with a colour print module option!

This is the FLUX Ador premium diode laser cutter of 20Watt. The Ador laser cutter has a user-friendly interface, supplemented with intuitive software with advanced AI functionalities. Designed for ease of use, ideal for beginners and those who want both laser cutter and the option to add colour to their project.

Add-on modules available:

To print in colour :  Flux Ador Print Module

To engrave on metal: Flux ador 2w Infrared Laser Module

Dimensions: 64 cm x 49 cm x 23 cm

Weight: 19 kg

Working area post-installation: 430 mm x 290 mm

Maximum laser resolution: 1000 DPI

Connectivity options: Ethernet, USB, and Wi-Fi (via a Wi-Fi USB stick)

Compatible Materials for Laser Cutting with Diode Laser module (Some materials may require multiple cutting passes):

Plywood: Up to 10 mm thickness

Black Acrylic: Up to 8 mm thickness

Leather: Up to 3 mm thickness

Full information on the Flux Ador Laser Printer can be found

here

The complete Ador bundle that includes the Ador 20 W, 2W Infrared Laser, the printing module with 4 solvent inks and the Beam Air, everything you need to start creating.

The Bundle includes:

Flux Ador 20 W 

Flux Ador 2 W Infrared Laser Module

Flux Ador Printing Module

Flux Ador Solvent Ink Cyan

Flux Ador Solvent Ink Magenta

Flux Ador Solvent Ink Yellow

Flux Ador Solvent Ink Black

Flux Beam Air

Meet the HoverCam Orbit, the world’s first and only wireless USB and HDMI document camera. Nearly lossless clarity and virtually lag-free casting up to 100 feet, at speeds 50x faster than the competition. Absolutely zero WIFI interference.

Automatic configuration from the factory for a plug-and- play, zero effort setup experience. Accessible By Any App On Windows, MacOS, ChromeOS, and Android With No Special Software Required. InvisiWire is the only technology that emulates a wired USB connection.

Effortless Setup: Orbit includes a wireless transmitter that you plug into a PC, Mac, Chromebook or Android Interactive Panel via USB, or to your display via HDMI. And unlike other “wireless” document cameras, you don’t have to sacrifice anything: no time setting parameters, no entering passwords, no software changes, no drivers to install, no security issues, no MiraCast, no hassle on IT Staff,

13 Megapixel Camera Sensor: Provides stunning details, crisp text, and remarkable image clarity.

Incredible Zoom With Optical Clarity: 800x total zoom. And thanks to our patented Adaptive Sensor Resolution (ASR) technology, you can zoom-in 4x before losing resolution.

Onboard Recording and SSD: Record videos, take snapshots, and adjust the camera image with the built-in microphone and convenient onboard controls. Store hours of lessons on the integrated 16GB Solid-State Drive (SSD).

Integrated Battery: When we say “wireless”, we mean it. Get 6+ hours of all-day wireless teaching thanks to the powerful 9800 mAh battery.

Compact Yet Sturdy: Nobody likes giant document cameras. Orbit folds down to stuff-in-your-bag size for use on the go.

The Flashforge Adventurer 5M Pro 3D Printer is a cutting-edge innovation in the world of 3D printing. With its advanced features and precision, it takes your creative projects to the next level. The spacious build volume allows you to print large-scale objects with ease, while the touchscreen interface ensures user-friendly operation. Its dual extruders open up endless possibilities for multi-material and multi-color printing. The built-in Wi-Fi connectivity and cloud printing options make it even more convenient to bring your ideas to life. Whether you're a professional or a hobbyist, the Adventurer 5M Pro is your trusted partner for precision and creativity in 3D printing.

Adventurer 5M meets the innovative needs of users with brand-new technology and craftsmanship. Whether you are a rookie or an expert, your originality is unlimited

No need for installation or complicated testing. You can quickly get started even if you are new to 3D printing

Advanced auto-leveling system can measures the nozzle height relative to the build plate, automatically compensating for any discrepancies without effort and providing a flawless first layer.

Quick-release Nozzle. Switch printing modes with quick-release nozzles in multiple diameters (0.25/0.4/0.6/0.8) to inspire your originality.

PEI build plate. Flexible magnetic printing platform, 1 second to remove bending, and make the bottom of the model smooth and fine.

600mm/s Printing Max Travelling Speed, making it able to print most builds in only a few hours.

50dB Quiet Printing

Inner Circulation Filtration: Improve the cavity air, making it suitable for ABS and other materials.

External circulation filtration: Air is drawn in from outside, filtered, and circulated out, suitable for materials like PLA and PETG.

HEPA + activated carbon double-layer filter: Blocks 99% of particulate matter and VOC, guarantee your health.

A set of 6 Pebeo Vitrea 160 colours for glass painting. Vitrea 160 provides dishwasher resistant colours for glass, after baking in a standard domestic oven at 160°C, for 40 minutes (to protect the glass surface, do not preheat).Once baked, colours become enhanced and become resistant to dishwashing and to normal solvents and detergents, making this the ideal paint for glass tableware and wine glasses.

Once baked, colours develop a beautiful glossy, semi-transparent finish that is lightfast. All colours can be mixed together - so the creative possibilities are endless

Set includes a selection of popular colours: Veil White, Saffron Yellow, Indian Red, Light Pink, Light Blue and Cyan.

The Mars Lumograph Art Set of 12 Graphite Pencils is a high-quality collection of graphite pencils designed for artists and illustrators. This set includes a range of 12 different pencil grades, from 6B (softest) to 4H (hardest), allowing for precise shading and drawing techniques.

The pencils feature break-resistant leads that provide smooth and consistent lines, making them ideal for various artistic applications, including sketching, shading, and fine detailing. Whether you're a professional artist or a hobbyist, this set offers versatility and precision for your graphite-based artwork.

Premium quality pencils for writing, drawing, sketching on paper and matt drafting film

The wide range of degrees makes lumograph the ideal tool for artists and graphic designers

Break resistant, thanks to bonded lead

Lines reproduce well

Grades : 6B, 5B, 4B, 3B, 2B, B, HB, F, H, 2H, 3H & 4H

Easy to erase and sharpen with any quality sharpener

Experience professional quality with these water-based, ready-to-use fabric paints, featuring opaque and highly covering contemporary colors. They are versatile and suitable for use on all light-colored, pre-washed fabrics, both natural and synthetic (containing at least 50% natural fibers).

Not only do these paints offer vibrant results, but they are also washing machine resistant. To set the colors, simply iron the reverse side of the fabric for 5 minutes on the cotton setting or place it in a preheated oven for 5 minutes at 300°F (150°C).

Pébéo, a trusted name in the art world for three generations, combines technical expertise with a passion for art to provide artists worldwide with top-quality materials and superior formulations.

This Opaque Initiation Set includes six assorted 20 ml bottles in White, Lemon Yellow, Vermilion, Denim Blue, Leaf Green, and Black, making it the perfect choice for artists of all levels.

Transparent, gloss, bubble-free 50% biosourced resin that is safer and more environmentally friendly. Easy to work with thanks to its two-component (resin A and hardener B) epoxy resin system. Liquid resin is ideal for casting in moulds or framed media, inclusions and even as a protective varnish. Once dry, it is hard and non-porous. Easy to use with professional results. For experienced and amateur adult users.

Pebeo Setacolor Leather Acrylic paint specially designed for leather and synthetic leather. Ultra-resistant, full coverage and luminous colours. The colours can be mixed together.

Contents :

1 x 45 ml Degreasing Primer: Auxiliary used to prepare and degrease the support, for optimum colour adhesion. To be used before applying the bottled colours or markers.

5 x 20 ml Setacolor Leather (Pure white, Vivid yellow, Intense red, Ocean blue, Extreme black): Acrylic paint specially designed for customising or repairing leather and synthetic leather.

1 x Fine brush.

Pebeo Setacolor Leather paint is an acrylic paint specially designed for leather and synthetic leather. Ultra-resistant, full coverage and luminous colours. The colours can be mixed together.

The Duochrome colours are a unique and were crafted expecially for Pebeo to provide ever-changing colours, depending on the movement and the light, on customised items. It includes 3 shade combinations: Pink/Blue, Blue/Green and Yellow/Purple. The effect appears best on dark surfaces. If you are customising a light surface, apply a black undercoat. They can be worked with a brush or airbrush using the range's lightening-thinning auxiliary.

The colours can be mixed together, allowing you to obtain an infinite number of shades. Once the surface has been prepared, they should be applied in thin, even coats for an even finish. The colours are opaque in a maximum of 3 thin layers. Allow to dry for at least 15 minutes between each coat to avoid re-diluting the lower coat (it is possible to accelerate drying with a hair dryer).

Resistance to scratches, bends and rubbing

A range of glitter effect colours

Can be used with a brush, paint roller, sponge, stencil, stamp and air-brush

Shimmering flakes of metal from French brand Pébéo.

Pébéo Deco shimmering flakes are derived from copper and aluminum sheets and gives a fantastic metal effect to your artwork. Can be used on various materials like canvas, wood, clay, paper etc. Easy to apply with gilding paste.

Use together with Pébéo Deco Gilding Paste. Clean and dry the object to be gilded. Brush over the gilding paste and leave for about 15 minutes. Lay out the gilding flakes and gently brush them into place using a fine soft brush. Protect the flakes against oxidation using varnish.

40% biosourced resin that is safer and more environmentally friendly. Transparent, Gloss, bubble-free and easy to work with thanks to its two-component (resin A and hardener B) epoxy resin system. With its semi-liquid texture, the resin is ideal for glazing while giving textured finishes and magnifying glass effects to flat surfaces such as photos, postcards, canvases, etc.

It is easy to use, with perfectly rounded edges

This resin is quick setting and is hard once dry

Professional results for experienced and amateur adult users

Glossy, transparent

The Gedeo Pack of 12 Mirror Effect Metal Leaves in Silver is perfect for gilding projects. You'll need foil glue to use them. These mirror foils stick to the glued area, allowing you to create stunning mirror-like designs.

You can apply these foils on various surfaces like wood, glass, and ceramic. Each sheet measures 14x14cm, providing enough material for your creative projects.

This Gedeo Mirror Effect Marker Kit by Pebeo is ideal for those looking to add some eye catching effects to various surfaces and objects from paper to glass and can be used for a range of disciplines such as mixed media projects, card making, decorative arts and crafts.

Inside the kit is a glue marker that will make the gilding process very easy as it can be used just like a pen to draw and write out your design. The glue marker is very versatile and can work on surfaces like wood, terracotta, card, paper, glass, stone and more. Once this glue has dried you can apply the mirror leaves with the shiny surface facing upwards gently onto the design with a gentle touch to ensure proper coverage and adhesion. Once this is done it will transfer the foil onto the shape you outlined, revealing your beautiful design with a reflective mirror like quality that will make your work stand out.

Contents: 1 x 12mm Glue Marker, 2 x Mirror Effect Sheets in Gold and Silver

Sheet Dimensions: 14cm x 14cm

Perfect for Gilding on a range of surfaces

This Gedeo Resin Application Set contains everything that you need to protect yourself when using Pebeo Resins and to prepare and mix the Resins.

Use with Gedeo Crystal, Colour, Pearl and Glazing Resins. This Resin Application Kit will ensure accurate results and measuring which is very important or the Resin won't set.

This Resin Set contains:

2 x Pairs Of Plastic Gloves

4 x Wooden Spatulas (for mixing the Resin)

5 x Pipettes (for application)

6 x Measuring Plastic Cups

1 x Protective Face Mask

Please note that this set does not include the Resin.

TTRS is modular in design and contains 24 levels with 31 modules in each level. A module typically takes a few minutes to complete. Student success is encouraged by immediate feedback and positive reinforcement. This feedback includes a score that appears at the end of each module.

The course starts with students learning to touch-type, read and spell the vowels - "a, e, I, o, u ". The audio track accompanies the letters as they appear on the screen, reinforcing sound-letter correspondence, which is a crucial skill for sounding out words in reading. The student then receives their first score - and success!

In the second module,the student is introduced to words grouped by onset, vowel-blend, and final consonant. For example - fed, wed, led. This teaches phonics in context and at the same time, the student is learning how to touch-type. With repetition, these words move from short-term to long-term memory.

Every 5th module is a dictation module that removes the visual element encouraging the student to listen to the words and then type out what they hear. This reinforces the words introduced in the previous 4 modules. It also develops spelling by testing sound-letter mapping skills.

Some students with dyslexia have problems with their short-term memory. Repetition is a way of “over-learning” which can help with these problems. TTRS uses a multi-sensory approach to repetition learning.

Through the multi-sensory approach, students hear the words using headphones, see the words printed on the screen, and are prompted as to which fingers to press via the on-screen keyboard.

Finally, through the sense of touch, they type out the words and learn to “spell with their fingers”.