Noch Gravel Mat 100x 60cm

Manufacturer: Noch

The base of the natural mat is a firm, hard-wearing special paper. The mat ist versatile. You can use it as a whole or cut it into smaller areas. The Gravel Mat is particularly suitable for use in railway station areas or for squares in industrial and commercial areas. But it can also be used to design driveways and courtyard entrances.

SKU: NOCH 00081

Availability: 7 in stock

€12.75

Qty:

i h

Customers who bought this item also bought

Kitronik Prong Soil Moisture Sensor for micro:bit

KI 5647

The Prong soil moisture sensor for BBC microbit is a sensor board that can be directly mounted to a BBC micro:bit to monitor the moisture present in the soil. The two conductive tines are placed into the soil. Any water or moisture in the soil will conduct to give an analogue voltage that can be read by the BBC micro:bit.

Prong is powered from the 3V supply of the BBC micro:bit. Use either the USB or JST connector on the BBC micro:bit to power the circuit. Prong and the BBC micro:bit can also be powered from the Mi:Power board to create a compact stand-alone unit.

The board has been designed so that the BBC micro:bit can be bolted on using 3 x M3 nuts and 3 x M3 screws. Place the screws through the P1, 3V and GND holes of the PCB and BBC micro:bit, then use the M3 nuts to fasten together on the back of BBC micro:bit. Alternatively, croc-clips can be used to connect between the Prong and the BBC micro:bit.

If using the Mi:Power board then additionally connecting P0 means the BBC micro:bit can sound an alarm if the soil becomes too dry. When fitted to the Prong moisture sensor, the micro:bit can be coded via any of the micro:bit editors, such as the Microsoft MakeCode editor.

Note: To ensure that the Prong moisture sensor has a long and fulfilling life, it is better to write your code to perform a moisture check every so often rather than continuously. When the check is performed continuously it promotes rapid erosion of the electrodes.

Features:

Measure soil moisture levels.

Attaches directly to the microbit.

Use in conjunction with the Mi:Power board to provide power and an audible alarm.

Code with any microbit coding editor.

Contents:

1 x Prong Soil Moisture Sensor for microbit.

3 x M3 Hex Nuts.

3 x M3 Countersunk Screws.

Dimensions:

Length: 68mm.

Height: 53mm.

PCB Thickness: 1.6mm.

€5.50

Kitronik 'Mini' Prong Soil Moisture Sensor for BBC micro:bit

KI 56107

The Mini Prong soil sensor is a short version of the original Prong sensor that has been specially adapted for use with the Kitronik Greenhouse Kit for BBC micro:bit. The Mini Prong soil moisture sensor for BBC microbit is a sensor board that can be connected to a BBC micro:bit with crocodile clips to monitor the moisture present in the soil. The two conductive tines are placed into the soil. Any water or moisture in the soil will conduct to give an analogue voltage that can be read by the BBC micro:bit.

Mini Prong is powered from the 3V supply of the BBC micro:bit. Use either the USB or JST connector on the BBC micro:bit to power the circuit. The board has been designed to work with croc-clips, to connect between the Mini Prong and the BBC micro:bit. When fitted to the Mini Prong moisture sensor, the micro:bit can be coded via any of the micro:bit editors, such as the Microsoft MakeCode editor. The Datasheet at the foot of this page includes technical information and a MakeCode blocks coding example.

Note: To ensure that the mini Prong moisture sensor has a long and fulfilling life, it is better to write your code to perform a moisture check every so often rather than continuously. When the check is performed continuously it promotes rapid erosion of the electrodes.

Features:

Measure soil moisture levels.

Attach to the micro:bit with crocodile clips.

Compatible with both BBC micro:bit V1 and BBC micro:bit V2.

Write code for it with any micro:bit coding editor.

Dimensions:

Length: 33mm.

Height: 43mm.

PCB Thickness: 1.6mm.

€3.75

Icon Artifical Cypress Tree 5 Pack

PR 27573

The Icon Artificial Cypress Tree 5 Pack is a perfect decorative addition for model-making, architectural projects, or miniature landscapes.

€2.45

Pimoroni Maker Essentials Various Headers

PIM 247

A handy assortment of headers for Raspberry Pi, Arduino, and electronics projects. The Pimoroni Maker Essentials Various Headers pack includes the most common sizes you’ll need for prototyping, soldering, and custom builds.

The Pimoroni Maker Essentials Various Headers kit provides a convenient selection of male and female headers, ideal for use with Raspberry Pi, Arduino, micro:bit accessories, and general electronics projects.

Whether you’re soldering a HAT, connecting jumper wires, or building custom circuits, this pack ensures you always have the right connector on hand. Each header is standard 2.54mm pitch, suitable for breadboards and PCBs alike.

Perfect for classrooms, makerspaces, and anyone who regularly prototypes with microcontrollers or single-board computers.

€9.95

From the same category

Daler Rowney A2 Graduate Mountboard 5 Assorted Colours

DR 329205900

Daler Rowney Graduate Mountboard is ideal for both mounting artwork and framing. Made to the Fine Art Trade Guild's standard specification, these pH-neutral boards provide reliable, archival-quality support.

€14.95

Daler Rowney A3 Graduate Mountboard 8 Assorted Colours

DR 329308900

€14.95

Daler Rowney A4 Graduate Mountboard 12 Assorted Colours

DR 329412900

€14.95

Icon Artifical Cypress Tree 5 Pack

PR 27573

The Icon Artificial Cypress Tree 5 Pack is a perfect decorative addition for model-making, architectural projects, or miniature landscapes.

€2.45

Icon Artificial Grass 40g

PR 27191

Perfect addition to any craft project.

€1.50

Icon Craft Rustic Vine 2m

ICON 41487

Add a natural, decorative touch to your crafts with the Icon Craft Rustic Vine. This flexible 2m vine is perfect for wreath making, displays, floral arrangements, and creative school projects.

€0.50

Noch 3D Cardboard Sheet "Clinker"

NOCH 56610

Enhance your model scenes with this Noch 3D Cardboard Sheet "Clinker," designed to replicate the look of traditional clinker brickwork with remarkable realism. This high-quality sheet features a textured, three-dimensional surface that captures the unique character of clinker bricks, perfect for creating facades, walls, and industrial buildings in model railways, dioramas, and architectural layouts. Easy to cut and manipulate, this versatile material integrates effortlessly into any urban or industrial setting, adding depth and authenticity to your model landscapes.

€3.50

Noch 3D Cardboard Sheet "Granite"

NOCH 57510

Width: 150 mm

Height: 0.5 mm

Length: 320 mm

€3.70

Noch 3D Cardboard Sheet "Quarrystone Wall"

NOCH 56640

Add depth and detail to your model scenes with the 3D Cardboard Sheet "Quarrystone Wall." This high-quality sheet features a realistic quarrystone texture that adds a rugged, natural look to any layout. The three-dimensional design provides a tactile surface, enhancing the authenticity of your model landscapes. Perfect for constructing walls, retaining structures, or architectural elements in model railways, dioramas, and miniature scenes. Easy to cut, shape, and install, this versatile material brings a realistic, durable finish to your projects, ideal for both urban and rural settings.

€3.50

Noch 3D Cardboard Sheet "Timber Wall"

NOCH 56964

Bring a rustic, authentic feel to your model landscapes with the 3D Cardboard Sheet "Timber Wall." This high-quality sheet features a realistic timber texture that adds depth and character to any scene. The three-dimensional design offers a lifelike wood appearance, perfect for creating structures like barns, cabins, fences, or other wooden elements in model railways, dioramas, and architectural layouts. Easy to cut and shape, this versatile material integrates seamlessly into both rural and urban settings, enhancing the realism and detail of your projects.

€3.50