Pimoroni NVMe Base Case for Raspberry Pi 5

The KKSB Case for Raspberry Pi 5 and M.2 NVMe HAT+ is a sleek, durable enclosure designed specifically to house both the Raspberry Pi 5 and the official M.2 HAT+. Made from sandblasted black anodized aluminium, it offers excellent heat dissipation, reliable protection, and clean aesthetics.

This case supports the Official Raspberry Pi Cooler and includes a 40-pin stackable header for airflow between the HAT and the cooler. Features like a built-in power button, rubber feet, GPIO cable access, and wall-mount keyholes make it a practical choice for advanced setups.

Raspberry Pi 5, M.2 HAT+, cooler, and electronics are not included.

Included:

KKSB Aluminium Case

Long & Short Spacers

Screws

Rubber Feet

Stackable 40-PIN Header

Expand your Raspberry Pi 5’s storage and performance with the Pimoroni NVMe Base Duo. This clever add-on lets you connect two M.2 NVMe SSDs to your Pi 5 for fast, reliable data access—ideal for advanced projects and servers.

The Pimoroni NVMe Base Duo is a high-performance add-on board designed exclusively for the Raspberry Pi 5. It connects via the Pi 5’s PCIe FPC connector, enabling direct, high-speed NVMe SSD storage. With support for two M.2 NVMe drives, you can easily expand storage capacity, improve data throughput, or set up mirrored configurations for resilience.

A built-in power management circuit and efficient thermal design ensure stable operation, even under sustained load. The board mounts neatly underneath your Raspberry Pi 5 using supplied hardware, keeping your setup compact and tidy.

Perfect for:

File and media servers

Databases or network storage

AI and data-logging applications

Fast-boot Raspberry Pi desktops

The new High Quality 16mm 10MP Telephoto Camera Lens from Raspberry Pi is compatible with C or CS-mount lenses.

Please note: Raspberry Pi High Quality Camera not included - available separately here.

The 16mm 10MP Telephoto lens offers a high level of zoom, for targeting your camera on specific subjects. The lenses screw directly onto the Raspberry Pi High Quality Camera and feature multiple adjustment options (via thumbscrews) for greater flexibility and image refinement. Covers for the front and rear of the lenses are included and come pre-fitted.

Features

Compatible with the Raspberry Pi High Quality Camera

Thumbscrew adjustment

Covers on front and back

Compatible with:

Raspberry Pi 4

Raspberry Pi 5

Raspberry Pi Zero

The new official Raspberry Pi High Quality Camera module (HQ Camera) for the Raspberry Pi is here - take your Raspberry Pi camera projects up a gear with the 12-megapixel Sony sensor, integrated aluminium tripod mount and interchangeable lens compatibility! 

To use this camera with a Raspberry Pi 5, you will need to buy this adapter cable!
To use this camera with a Raspberry Pi Zero, you will need to buy this adapter cable!

This camera module will not function without a lens (purchased separately, options below).
High Quality 6mm Wide Camera Lens from Raspberry Pi 
High Quality 16mm 10MP Telephoto Camera Lens from Raspberry Pi

The incredible new High Quality (HQ) Camera module from Raspberry Pi offers a higher resolution (12 megapixels, compared to 8 megapixels), and sensitivity than the previous Camera Module v2. It features a Sony IMX477 sensor, a 200mm FPC cable for connection to your Raspberry Pi, a milled aluminium lens mount with integrated 1/4” -20 tripod mount and focus adjustment ring, and a C- to CS-mount adapter. A lens cover is also included with the module and comes pre-fitted. There’s even a small screwdriver in the box for making adjustments. It’s designed to work with interchangeable lenses in both C- and CS-mount form factors giving you ultimate flexibility with your Raspberry Pi camera projects. A C-CS mount adapter comes pre-fitted to the module.

Familiar coding
The High Quality (HQ) Camera uses the same commands as the standard Raspberry Pi Camera Module, such as libcamera (or raspistill/raspivid if you're using Buster or an even older OS image). Libcamera and similar commands will query the camera firmware for the resolution of the sensors (as they already do today) and will default to 12 megapixels for the High Quality Camera. The drivers for the High Quality (HQ) Camera are built-in to Raspberry Pi OS too, so upgrading your camera project with the High Quality Camera is a simple task.

Magnificent for Makers
A huge range of popular projects from time-lapse photography to Raspberry Pi CCTV-style systems can be made double-awesome with the new High Quality Camera module. Shoot in greater detail, with improved low-light performance and take advantage of the range of available lenses to get the perfect shot.

Incredible for Industry
The High Quality Camera provides an alternative to the Camera Module v2 for industrial and consumer applications, including security cameras which require the highest levels of visual fidelity and/or integration with specialist optics.

In the box

High Quality (HQ) Camera module with integrated tripod mount (fitted)

Lens cover (fitted)

C-CS lens adaptor (fitted)

200mm ribbon cable (fitted)

Small flat-head screwdriver for adjustments

Compatible with:

Raspberry Pi 4

Raspberry Pi 5

Raspberry Pi Zero