Search
From the same category
4mm Oak Veneered MDF 600mm x 400mm Sheet
KI 3219
High quality A/B grade Oak Veneered MDF panel measuring 600mm x 400mm. Ideal for structural projects requiring a high quality appearance and finish on both the topside and panelling. Suitable for laser cutting.
This MDF panel is veneered on both faces of the sheet: A grade veneer on the front and B grade on the reverse.
A/B grade Oak Veneered finish. Veneer thickness approximately 0.5mm. High quality wood and veneer, for great looking finishes. MDF core. Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986. Low formaldehyde emissions. 1 x 4.0mm Oak Veneered MDF, 600mm x 400mm Sheet. Length: 600mm, Width: 400mm, Height: 4.0mm, Veneer thickness (approximately): 0.5mm
This MDF panel is veneered on both faces of the sheet: A grade veneer on the front and B grade on the reverse.
€13.95
6mm Poplar Laser Plywood 600mm x 400mm Sheet
KI 3210
This is a high-quality Italian Poplar Plywood sheet (laserply) that is suitable for a wide range of applications and is particularly suited to laser cutting. Poplar has a lower density than Birch, meaning that it can be easily laser cut at lower power settings
This Poplar Plywood has an AB grading which is typically the best grade of plywood available.
High-quality Italian Poplar laser plywood sheets (laserply) Low density for easier laser cutting Top-quality AB grading meaning fewer knots aiding consistency of laser cutting PEFC Certified (Programme for the Endorsement of Forest Certification Interior grade glue 1 x 6mm Poplar Laser Plywood (laserply), 600mm x 400mm Sheet Length: 600mm Width: 400mm Height: 6mm
This Poplar Plywood has an AB grading which is typically the best grade of plywood available.
€11.95
Value Acrylic Sheet 3mm x 600mm x 400m Range
KI 3MM ACRYLIC-RANGE
3mm Clear (Cast) Acrylic Sheets measures 600mm x 400mm. The surface of the sheet has a high gloss finish. Clear Acrylic sheets will allow light to pass through clearly, enabling objects to be distinguished through the material with virtually no colour bias.
Excellent value for money. High gloss surface. Very high light transmission. Easily laser cut, drilled and thermoformed. These sheets can be used as an alternative to glass as they have very good mechanical properties. Length: 600mm. Width: 400mm. Thickness: 3mm (nominal).
€8.50
Value Acrylic Sheet 5mm x 600mm x 400m Range
KI 5MM ACRYLIC-RANGE
This 5mm (Cast) Acrylic Sheet measures 600mm x 400mm. The surface of the sheet has a high gloss finish. Clear Acrylic sheets will allow light to pass through clearly, enabling objects to be distinguished through the material with virtually no colour bias
Excellent value for money. High gloss surface. Very high light transmission. Easily laser cut, drilled and thermoformed. These sheets can be used as an alternative to glass as they have very good mechanical properties. Length: 600mm. Width: 400mm. Thickness: 5mm (nominal).
€13.95
3mm Laser Compatible Medite MDF 600mm x 400mm Sheet
KI 3211
Kitronik Laser Compatible Medite Premier MDF sheets are highly versatile, suitable for enclosures and many other applications. Our laser MDF are EU class E1, which means low formaldehyde emissions. It is this low formaldehyde emission that makes this MDF suitable for laser cutting.
The Laser MDF sheets are produced in line with FSC (Forest Stewardship Council) certification standards.
Low formaldehyde emissions Highly versatile Produced to Forestry Stewardship Council certification Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986 1 x 3mm Laser Compatible Medite Premier MDF, 600mm x 400mm sheet Length: 600mm Width: 400mm Height: 3mm
The Laser MDF sheets are produced in line with FSC (Forest Stewardship Council) certification standards.
€2.95
3mm Poplar Laser Plywood 600mm x 400mm Sheet
KI 3209
This is a high-quality Italian Poplar Plywood sheet (laserply) that is suitable for a wide range of applications and is particularly suited to laser cutting. Poplar has a lower density than Birch, meaning that it can be easily laser cut at lower power settings.
This Poplar Plywood has an AB grading which is typically the best grade of plywood available.
High-quality poplar laser plywood sheets (laserply) Low density for easier laser cutting Top quality AB grading meaning fewer knots aiding consistency of laser cutting PEFC Certified (Programme for the Endorsement of Forest Certification) Interior grade glue 1 x 3mm Poplar Laser Plywood (laserply), 600mm x 400mm Sheet Length: 600mm Width: 400mm Height: 3mm
This Poplar Plywood has an AB grading which is typically the best grade of plywood available.
€7.95
Clear Value Acrylic Cast 3mm x 600 x 400mm Sheet
KI 43185
This 3mm Clear (Cast) Acrylic Sheet measures 600mm x 400mm. The surface of the sheet has a high gloss finish. Clear Acrylic sheets will allow light to pass through clearly, enabling objects to be distinguished through the material with virtually no colour bias.
Dimensions:
Length: 600mm Width: 400mm Thickness: 3mm (nominal)
Dimensions:
€9.50
Laser Engraving Slate Coasters Square Pack of 4
KI 5511
Add a touch of class and sophistication to your beverage consumption with these square-shaped slate coasters. Not only do they look stylish and sleek, but they are also durable, practical, and will protect your surfaces from heat and liquids. Although stone/slate cannot be cut with a CO2 laser, they can be laser engraved for that personal touch. They can easily be cleaned with warm water, with a touch of detergent if heavily soiled, and they are as good as new. Supplied as a pack of 4.
These stylish square-shaped coasters will look great in any location. They are durable, practical, and resistant to scratching and staining. Protect your tables and surfaces from heat/liquid damage. Personalise them with CO2 laser engraving, a coat of lacquer will help improve the contrast. They can easily be wiped clean with warm water, or warm water mixed with a small amount of mild detergent. The perfect gift for someone special! If they fade over time they can easily be brought back to life with a little olive oil. An even coat of lacquer can have a dramatic positive effect on their look. Length: 100mm (Nominal). Width: 100mm (Nominal). Thickness: 5mm (Nominal).
€4.94
Laser Engraving Slate Coasters Round Pack of 4
KI 5512
Add a touch of class and sophistication to your beverage consumption with these round shaped slate coasters. Not only do they look stylish and sleek, but they are also durable, practical, and will protect your surfaces from heat and liquids. Although stone/slate cannot be cut with a CO2 laser, they can be laser engraved for that personal touch. They can easily be cleaned with warm water, with a touch of detergent if heavily soiled, and they are as good as new. Supplied as a pack of 4.
These stylish round-shaped coasters will look great in any location. They are durable, practical, and resistant to scratching and staining. Protect your tables and surfaces from heat/liquid damage. Personalise them with CO2 laser engraving, a coat of lacquer will help improve the contrast. They can easily be wiped clean with warm water, or warm water mixed with a small amount of mild detergent. The perfect gift for someone special! If they fade over time they can easily be brought back to life with a little olive oil. An even coat of lacquer can have a dramatic positive effect on their look. Length: 100mm (Nominal). Width: 100mm (Nominal). Thickness: 5mm (Nominal
€4.94
Rough Cut Laser Engraving Slate Sign
KI 5519
These stylish high quality natural rough-cut Horizontal slate signs look great hanging in a window, on a wall or anywhere else you might care to put up a sign. Not only do they look stylish and sleek, but they are also durable, practical, and will naturally draw the eye wherever they are put. Although stone/slate cannot be cut with a CO2 laser, they can be laser engraved, which makes for a unique long-term sign. They can also be written on with chalk for information of a more temporary nature, when done just give them a wipe with warm water, with a touch of detergent if heavily soiled, and they are as good as new. Supplied as a single unit.
These stylish high-quality natural rough-cut Horizontal slate signs will look great in any location. They are durable, practical, and resistant to scratching and staining. Personalise them with CO2 laser engraving, a coat of lacquer will help improve the contrast. They can easily be wiped clean with warm water, or warm water mixed with a small amount of mild detergent. The perfect gift for someone special! If they fade over time they can easily be brought back to life with a little olive oil. An even coat of lacquer can have a dramatic positive effect on their look. Width: 300mm (Nominal). Length: 120mm (Nominal). Thickness: 5mm (Nominal).
€4.26
Payment options
