Search
All Categories
    Menu Close

    MonkMakes Sensor Board for Microbit

    Manufacturer: Monk Makes
    The MonkMakes Sensor Board allows you to detect sound levels, temperature and light levels. It features ring pad connectors for use with crocodile clips make it easy to connect to the board to a microbit.

    Sound Level: It senses sound level with a MEMs, which is a microphone on a chip that also features a pre-amplifier circuit. You can then use the plot bar graph block in the Microsoft MakeCode editor to display the result on the microbits LED matrix.

    Temperature Level: The temperature output from the board is a voltage that indicates the temperature. This is then measured using an analog input on the micro:bit. If you want your temperatures in Fahrenheit, then multiply the temperature in degrees C by 9, divide the result by 5 and then add 32.

    Light Level: The light sensor uses a photo-transistor to measure the light level and produces an output voltage that increases as the light level increases.

    Features:
  • 3V and GND connections can be made from either side and allow you to power a second board such as the MonkMakes Relay Board or MonkMakes Speaker.
  • LED ‘power on’ indicator.
  • Reverse polarity protection.
  • All three sensors are analog and can be connected to pins P0, P1 and P2 using alligator clips.
  • Detects sound level with a MEMs (microphone on a chip) and a pre-amplifier.
  • Uses a thermistor to measure temperature.
  • Light level detection with a photo-transistor (0 to 1023).
  • All three sensors are analog and can be connected to pins P0, P1 and P2 using alligator clips.

  • Dimensions:
  • Length: 63.2mm.
  • Width: 55.7mm.
  • Thickness: 1.6mm.
  • SKU: MONK 062
    Availability: 15 in stock
    €12.95
    i h
    Ship to
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options

    Product Resources / Datasheet

    Products specifications
    MICRO:BIT
    Device TypeBoards, Modules & Sensors
    *
    *
    *
    Customers who bought this item also bought
    Picture of Micro:bit V2 GO

    Micro:bit V2 GO

    MIC 494
    With the micro:bit Go Bundle you have a complete set to get started coding right away. This bundle includes a micro:bit board, micro USB cable, battery holder and 2x AAA batteries.

    The BBC micro:bit is a pocket-sized computer that introduces you to how software and hardware work together. It has an LED light display, buttons, sensors and many input/output features that, when programmed, let it interact with you and your world. The new micro:bit V2.2 with sound adds a built-in microphone and speaker, as well as an extra touch input button and a power button.

    For more information please see below

    €22.95
    Picture of Kitronik Protector Case for Microbit - V1 &V2

    Kitronik Protector Case for Microbit - V1 &V2

    KI 56102
    This Kitronik MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original Micro:bit V1and the new Micro:bit V2and continues in the traditions of our earlier cases. The cases are designed to keep the micro:bit safe, fully useable, and to offer the freedom of not being tethered to a computer.

    If a battery holder is attached to the back it can also can be stood neatly on a desk and it also features large and easy to read labels for the A and B buttons. This case provides full access to the bottom pins on the BBC micro:bit so the Edge Connector Breakout Board for the BBC Micro:bit can be used. One of the key features of the micro:bit is its physical size and this case has been designed with that in mind. It's as compact as we could make it, whilst still offering protection for the micro:bit.

    The case is also supplied with a sticky fixer pad so that you can attach a battery holder to the rear of the case, such as can be found in our BBC micro:bit Starter Kit. When a battery holder is used, micro:bit projects can go wherever you go. Even with a battery holder attached, the case is still palm-sized and portable.

    Note: This case requires assembly, full instructions can be found in the resources section below.

    Features:
  • Provides excellent protection to the BBC micro:bit whilst allowing access to the bottom pins.
  • Full access to the A and B buttons on the BBC micro:bit.
  • Attach a battery cage to the rear of the case with the supplied sticky fixer.
  • Full access to pins and connections including the micro USB connector.
  • Clear case material shows the on-board LEDs in perfect clarity.
  • The case is compatible with versions 1 and 2 of the micro:bit.
  • When used in conjunction with a battery holder, micro:bit projects can be fully mobile.

  • Contents:
  • 4 x M3 Cheese Head Nylon Machine Screw.
  • 1 x Sticky Fixer Pad.
  • 4 x M3 Nylon Full Nut.
  • Laser-cut parts;
    -- 1 x Back Mounting Plate.
    -- 2 x Mid-layer Parts.
    -- 1 x Mid-layer Plate.
    -- 1 x Front Plate.

  • Dimensions:
  • Length: 65mm.
  • Width: 37mm.
  • Depth (without screws): 12mm.
  • Depth (with screws): 18.5mm.

  • €5.20
    Picture of Kitronik Crocodile Leads Pack of 10

    Kitronik Crocodile Leads Pack of 10

    KI 2407
  • Pack of ten wires in a selection of five colours each with insulated crocodile clips on both ends.
  • Lead length 0.5m
  • Max current 0.5 Amp
  • €4.10