RASPBERRY PI 4

The Raspberry Pi 27W USB-C Power Supply is an ideal power supply for Raspberry Pi 5 and Pi 4, especially for users who wish to drive high-power peripherals, such as hard drives and SSDs, from Raspberry Pi 5’s four Type A USB ports.

Delivering a maximum of 5.1V, 5A, it supports USB PD (Power Delivery), so Raspberry Pi 5 can communicate with it and select the most appropriate power profile. This enables Raspberry Pi 5 to increase the USB current limit automatically from the default 600mA to 1.6A, in order to provide extra power for devices connected to the four Type A USB ports.

Compatible with:

Raspberry Pi 4

Raspberry Pi 5

The Raspberry Pi 4 Case is a snug and secure fit for Raspberry Pi 4B

It features high-quality two-part ABS construction with cut-outs for the dual micro HDMI®, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card. An optional clip-on lid can be removed to provide access to your Raspberry Pi's GPIO pins or connect a HAT. The Raspberry Pi 4 Case is fully compatible with the Raspberry Pi 4 Case Fan.

Anti-slip feet keep your Raspberry Pi 4 stable, and power and activity lights remain visible through the side of the case.

Important Note: Be sure to remove your SD card before fitting or removing your Raspberry Pi from the case to avoid damage.

Key Features:

High-quality ABS construction

Secure fit protects your Raspberry Pi 4

Optional removable clip-on lid

Cut-outs for dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card

Power and activity lights remain visible

Anti-slip feet

Compatible with Raspberry Pi 4 Case Fan

The Raspberry Pi Sense HAT gives your Raspberry Pi an array of sensing capabilities. The on-board sensors allow you to monitor pressure, humidity, temperature, colour, orientation, and movement. The bright 8x8 RGB LED matrix allows you to visualise data from the sensors, and the five-button joystick lets users interact with your projects.

The Sense HAT was originally developed for use on the International Space Station, as part of the educational Astro Pi programme run by the Raspberry Pi Foundation in partnership with the European Space Agency. It is well suited to many projects that require position, motion, orientation, or environmental sensing. The Sense HAT is powered by the Raspberry Pi computer to which it is connected.

An officially supported Python library gives you easy access to all on-board sensors, the LED matrix, and the joystick. The Sense HAT is compatible with any Raspberry Pi model featuring a 40-pin GPIO header.

The sensors enable you to read:

Gyroscope

Accelerometer

Magnetometer

Temperature

Barometric pressure

Humidity

Colour and brightness

Documents:

Sense HAT Product Brief

Compatible with:

Raspberry Pi 4

Raspberry Pi 5

Raspberry Pi Zero

Expand your connectivity options with the Raspberry Pi USB 3 Hub, transforming a single USB-A port into four accessible connections. This versatile hub includes an optional USB-C power input to support high-power devices, while standard power works perfectly for lower-energy peripherals. Designed to work smoothly across all Raspberry Pi models, the USB 3 Hub is ideal for enhancing your setup with ease.

The Raspberry Pi 4 Model B is the best performing single-board computer to date from the Raspberry Pi Foundation that has undergone a huge upgrade in comparison to all previous models. For the first time, the Pi 4 B is available in different memory versions, this model has 1GB with true Gigabit Ethernet, USB-C power, USB 3.0, dual 4k display output and a quad-core CPU to rival the performance of an entry-level desktop PC. It’s a truly powerful and capable computer in a small, affordable package.

The Raspberry Pi 4 has received a performance boost to 1.5GHz with an upgraded quad-core processor.

The fanless, energy-efficient Raspberry Pi runs silently and uses far less power than other computers.

Memory size of 4GB to enable more complicated processes to run efficiently.

Dual micro-HDMI ports enables a dual screen set-up.

Up to 4K resolution video decoding.

Raspberry Pi 4 has upgraded USB capacity: along with two USB 2 ports you'll find two USB 3 ports, which can transfer data up to ten times faster.

Bluetooth 5.0 and WiFi - an improvement on the previous Bluetooth 4.2 on the Pi 3 B+

Raspberry Pi 4 comes with Gigabit Ethernet, along with onboard wireless networking and Bluetooth.

Power is supplied via USB-C – Raspberry Pi 3 was powered via micro-USB at 5.1v

The Raspberry Pi 4 Model B (4GB) delivers an impressive, high-performance experience, powered by a 64-bit quad-core processor. Key features include dual-display support with resolutions up to 4K via dual micro HDMI ports and hardware video decode up to 4Kp60. With 4GB of RAM, dual-band 2.4/5.0 GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and optional PoE support (requires PoE HAT add-on), it’s built for versatility and speed.

Enjoy desktop performance comparable to entry-level x86 PC systems, and benefit from backward compatibility with the Raspberry Pi 3 Model B+. The Raspberry Pi 4 Model B maintains similar power efficiency while greatly enhancing processor speed, multimedia performance, memory, and connectivity.

The dual-band wireless LAN and Bluetooth come with modular compliance certification, simplifying integration into end products by reducing compliance testing needs—helping to minimize both cost and time to market.

The slim, hackable, and attractive case for the Raspberry Pi 4. Crafted out of five unique layers including a transparent top and base that leave your beautiful Raspberry Pi 4 visible inside. Each layer is laser-cut from high-quality, cast acrylic and once stacked they securely contain a Raspberry Pi 4 while leaving the primary ports, including the camera port, display port, and GPIO accessible.

Weighing just over 50 grams, the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly. The dimensions are: 99x66x15mm (WxLxH, not including bolt heads and nuts).

Features

Compatible with Raspberry Pi 4 only

Cutout in lid for 40x30mm heatsink or Fan SHIM

Super-slimline profile

Fully HAT-compatible

Works great with standoffs!

Protects your beloved Pi!

Clear top and base (Ninja and Red) leave Raspberry Pi 4 visible

GPIO cut-out

Handy laser-etched port labels

Leaves all ports accessible

Made from lightweight, high-quality, cast acrylic

Great for hacking and tinkering!

Compatible with:

Raspberry Pi 4

Capture high-quality images and videos in low-light or infrared conditions with the Raspberry Pi Camera Module 3 (NoIR). Designed without an infrared filter, this camera is perfect for night vision projects, security applications, and scientific experiments requiring infrared sensitivity. With a 12-megapixel Sony IMX708 sensor, autofocus capability, and high dynamic range (HDR), this module delivers sharp, clear visuals in a variety of lighting conditions.

Key Features:

12 Megapixel Sony IMX708 Sensor: Captures sharp and detailed images.

NoIR (No Infrared Filter) – Ideal for low-light and infrared photography.

Autofocus Capability – Ensures clear and precise images.

High Dynamic Range (HDR) – Improved image clarity in varied lighting conditions.

Wide Field of View (FoV 75°) – Perfect for capturing broader scenes.

Compact & Lightweight – Easy to integrate into Raspberry Pi projects.

Compatible with All Raspberry Pi Boards – Works via the CSI (Camera Serial Interface) connector.

This NoIR version of the Camera Module 3 is designed for applications that require enhanced low-light performance. It is compatible with infrared lighting, making it ideal for night vision projects, security cameras, and scientific applications.

Note: A Raspberry Pi board (sold separately) is required for operation. To use this module in complete darkness, an infrared light source is recommended.