Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Search
From the same category
40-pin GPIO Ribbon Cable for Raspberry Pi
PIM CAB0505
This 175mm long GPIO (general purpose input/output) ribbon cable lets you extend the reach of your Raspberry Pi's pins, bridging them out to other boards or PCBs. The Raspberry Pi's GPIO can be used for all sorts: twiddling pins on or off, providing 3.3V or 5V power, communicating with I2C or SPI devices, and much more. This cable gives you a bit more flexibility in where you route those signals.
175mm long x 51mm wide 40 wires, 2x20 pin female connectors Pin 1 is marked by the white/pink wire
Note: Be careful to connect this cable to your board the correct way around. You can't use it with a male header to connect to a HAT's female header, as the pins will be mirrored. You'll risk damaging both your board and your Raspberry Pi if you connect the cable incorrectly so, if in doubt, check the order of the pins on the connector with a multimeter before connecting things up!
Compatible with:Raspberry Pi 4 Raspberry Pi 5
Note: Be careful to connect this cable to your board the correct way around. You can't use it with a male header to connect to a HAT's female header, as the pins will be mirrored. You'll risk damaging both your board and your Raspberry Pi if you connect the cable incorrectly so, if in doubt, check the order of the pins on the connector with a multimeter before connecting things up!
Compatible with:
€5.50
Pimeroni LTE 4G Antenna Medium Stick 108mm
PIM COM0641
Improve your cellular connectivity with this 194mm Long Stick LTE 4G Antenna, designed for use with the Pimoroni LTE Cat-4 Breakout (PIM717) and other compatible LTE modules.
This high-gain external antenna provides improved signal reception and more reliable data connections compared to compact stub antennas — ideal for IoT, remote monitoring, industrial projects, and Raspberry Pi-based cellular applications.
Perfect for projects where signal strength matters, especially in rural or low-coverage environments.
This high-gain external antenna provides improved signal reception and more reliable data connections compared to compact stub antennas — ideal for IoT, remote monitoring, industrial projects, and Raspberry Pi-based cellular applications.
Perfect for projects where signal strength matters, especially in rural or low-coverage environments.
€7.75
Raspberry Pi 32GB Micro SD Card A2 Class Pre-Programmed
RP SC1660LM
Optimise data transfer speeds on your Raspberry Pi computer with an official Raspberry Pi SD Card. Rigorously tested to ensure optimal performance on Raspberry Pi computers, these Class A2 microSD cards help ensure you get the smoothest user experience from your device.
Documents:Raspberry Pi SD Cards Offical Product Brief
Documents:
€14.95
Raspberry Pi Camera Adapter Cable for Pi5 (200mm)
RP SC1128
The Raspberry Pi 5 includes two MIPI connectors designed for camera modules or displays. These connectors are more compact than those on previous Raspberry Pi models, so an adapter cable is required to connect your camera module.
Cable length: 200mm
These adapter cables feature a 22-pin, 0.5mm-pitch connector on one side for the Raspberry Pi 5, and a 15-pin, 1mm-pitch connector on the opposite side.
These camera cables DO NOT work with DSI displays.
Cable length: 200mm
These adapter cables feature a 22-pin, 0.5mm-pitch connector on one side for the Raspberry Pi 5, and a 15-pin, 1mm-pitch connector on the opposite side.
These camera cables DO NOT work with DSI displays.
€1.15
Raspberry Pi Camera Adapter for Pi Zero
RP SC0002
Your new Raspberry Pi Zero has its own camera port, but it's smaller than the one on the Raspberry Pi 4, so how do you connect your awesome Raspberry Pi Camera Module or High Quality Camera to it?
This little cable will sort you right out! It has a Zero-sized (22-pin) connection on one side, and the usual Camera Module (15-pin) connection on the other - allowing you to swap your Camera Module's cable for this one and plug it straight into your Raspberry Pi Zero.
It's 15cm end to end and as flexible and strong as you'll ever need, this will be perfect for your miniature camera project!
Raspberry Pi Zero & Camera module not included
Compatible with:Raspberry Pi Zero
This little cable will sort you right out! It has a Zero-sized (22-pin) connection on one side, and the usual Camera Module (15-pin) connection on the other - allowing you to swap your Camera Module's cable for this one and plug it straight into your Raspberry Pi Zero.
It's 15cm end to end and as flexible and strong as you'll ever need, this will be perfect for your miniature camera project!
Raspberry Pi Zero & Camera module not included
Compatible with:
€4.45
Raspberry Pi Display Adapter Cable for Pi5 (200mm)
RP SC1131
The Raspberry Pi 5 provides two MIPI connectors to use with displays (DSI) or camera modules. These connectors are smaller than previous generations of Raspberry Pi, so you'll need one of these adapter cables to use your Raspberry Pi touchscreen display.
These camera cables DO NOT work with DSI displays. You'll need a different cable for displays - they are not interchangeable!
These camera adapter cables have a 22-way 0.5mm-pitch connection at one end (for the Raspberry Pi 5 end), and a 15-way 1mm-pitch connector at the other (for your camera). These cables have CAMERA clearly printed on them so that you don't get them mixed up with the very similar-looking display cables.
FeaturesCamera adapter cable for Raspberry Pi 5 For use with camera modules only (not compatible with DSI displays) 22-way 0.5mm pitch to 15-way 1mm-pitch FPC cable (Flexible Printed Circuit) CAMERA printed on the cable body for easy identification Length : 200mm
Compatible with:Raspberry Pi 5
These camera cables DO NOT work with DSI displays. You'll need a different cable for displays - they are not interchangeable!
These camera adapter cables have a 22-way 0.5mm-pitch connection at one end (for the Raspberry Pi 5 end), and a 15-way 1mm-pitch connector at the other (for your camera). These cables have CAMERA clearly printed on them so that you don't get them mixed up with the very similar-looking display cables.
Features
Compatible with:
€1.15
Raspberry Pi Micro-HDMI to HDMI Cable
RP HDMI CABLE-GROUP
The official Raspberry Pi micro HDMI to standard HDMI (A/M) cable designed for the Raspberry Pi 5 and Raspberry Pi 4 Model B.
Ideal for setting up a dual-screen display with the latest Raspberry Pi 5 or Raspberry Pi 4.
Please note: this HDMI cable is not compatible with the Raspberry Pi 2, 3 or Zero.
Length : 1m
Compatible with:Raspberry Pi 4 Raspberry Pi 5
Ideal for setting up a dual-screen display with the latest Raspberry Pi 5 or Raspberry Pi 4.
Please note: this HDMI cable is not compatible with the Raspberry Pi 2, 3 or Zero.
Length : 1m
Compatible with:
From €5.75
Raspberry Pi microSD to Full Size SD Card Adapter
RP SC0041
The MicroSD to SD Card Adapter – perfect for use with your Raspberry Pi!
Easily convert your MicroSD card into a standard-sized SD card, making it compatible with PC and laptop SD card readers. Ideal for flashing a new operating system using Raspberry Pi Imager.
Compatible with:
€0.60
Raspberry Pi Micro-USB OTG Adapter for Pi Zero
RP SC0727
Use this Micro-USB OTG adapter cable to connect full-size USB accessories to your Raspberry Pi Zero. Designed for the Pi Zero’s micro-USB OTG port, this compact cable lets you easily attach keyboards, flash drives, wireless receivers, and other USB peripherals. Raspberry Pi Zero not included
Compatible with:Raspberry Pi Zero
Compatible with:
€1.85
Raspberry Pi Official Mini-HDMI Cable for Pi Zero
RP SC0863
The official Raspberry Pi Mini HDMI C/Male to HDMI A/Male cable designed for use with Raspberry Pi Zero computers
Compatible with:
Raspberry Pi Zero
Please note: this HDMI cable is not compatible with the Raspberry Pi 5, Pi 500, Pi 4 or Pi 400
Compatible with:
Raspberry Pi Zero
Please note: this HDMI cable is not compatible with the Raspberry Pi 5, Pi 500, Pi 4 or Pi 400
€3.45
Payment options
