Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Search
Euro
RASPBERRY PI HATS & EXPANSION BOARDS
Sort by
Display per page
Pin Header for Raspberry Pi Pico Board 2 Pack
KI 4175
This pin header pack is specifically for use with the Raspberry Pi Pico microcontroller. It is supplied as two strips of 20 pins each that are the right length and ready to be soldered directly to the board. Just take them out of the bag and fit them.
These are the same headers that are soldered onto the Pico with pin headers assembled, which is also available via the Kitronik Discovery Kit for Raspberry Pi Pico (Pico Included).
These pin headers make connecting I/O devices or use with a prototyping breadboard simple and convenient. They also allow for use with our accessory boards, such as; the Compact Robotics Board and the Compact Motor Driver Board.
This pin header features an industry-standard header terminal connector for mating with industry-standard sockets on a 2.54mm pitch. It's reliable, rugged, low cost, and this connector is a must for any standard board-to-board mating for example Pico/Arduino.
Features:Pin header pack for use with the Raspberry Pi Pico. Compatible with our range of accessory boards for Raspberry Pi Pico. 2.54mm pitch single row through-hole PCB footprint. Supplied as two strips of 20 pins each. Industry-standard header/ terminal specification. Standard 2.50mm insulator profile. Standard 6.10mm contact post, 3mm solder tail. Contact Material: Brass. Contact Plating: Gold Flash Plated. Rated Current: 3A. Insulation Resistance: 5000 MΩ Max. Operating Temperature: -40°C to +105°C. RoHS compliant. >
These are the same headers that are soldered onto the Pico with pin headers assembled, which is also available via the Kitronik Discovery Kit for Raspberry Pi Pico (Pico Included).
These pin headers make connecting I/O devices or use with a prototyping breadboard simple and convenient. They also allow for use with our accessory boards, such as; the Compact Robotics Board and the Compact Motor Driver Board.
This pin header features an industry-standard header terminal connector for mating with industry-standard sockets on a 2.54mm pitch. It's reliable, rugged, low cost, and this connector is a must for any standard board-to-board mating for example Pico/Arduino.
Features:
€1.65
Kitronik Robotics Board for Raspberry Pi Pico
KI 5329
Make the Raspberry Pi Pico the core of your new robotics project with the Kitronik Compact Robotics Board for Raspberry Pi Pico.
This Compact Robotics Board enables the Raspberry Pi Pico (connected via pin header) to drive 4 motors (or 2 stepper motors) and 8 servos. It also features 27 other I/O expansion points and Power and Ground connections. Please note, when used with a stepper motor, half-stepping is supported - but not micro-stepping.
The Robotics Board features 2 Dual H Bridge Motor Driver ICs. These are capable of driving 2 standard motors or 1 stepper motor each, with full forward, reverse, and stop control. There are also 8 servo outputs, capable of driving standard and continuous rotation servos. They can all be controlled by the Pico using the I2C protocol, via a 16-channel driver IC. The IO break-out provides connections to all the unused pins on the Pico. The 27 available I/O pins allow other devices, such as sensors or ZIP LEDs, to be added to the board.
Power is provided via either a terminal block or servo-style connector. The supply is then controlled by an on/off power switch to the board and there is also a green LED to indicate when the board has power. The board then produces a regulated 3.3V supply which is fed into the 3V and GND connections to power the connected Pico. This removes the need to power the Pico separately. The 3V and GND pins are also broken out on the header, which means external devices can also be powered.
To use the robotics board, the Pico should be firmly inserted into the dual row pin socket on the board. Ensure the Pico is inserted with the USB connector at the same end as the power connectors on the robotics board. This will allow access to all of the board functions and each pin broken out.
Note Due to the additional current draw of a Pico W's wireless features it is not recommended to use the wireless functionality with this board. The Pico's W standard functionality will work as normal only the wireless functions are affected.
Features:A compact yet feature-packed board designed to sit at the heart of your Raspberry Pi Pico robotics projects. The board can drive 4 motors (or 2 stepper motors), with full forward, reverse, and stop control, and 8 servos. It also features 27 other I/O expansion points and Power and Ground connections. The I2C communication lines are also broken out allowing other I2C compatible devices to be controlled. Additionally, the board features an on/off switch and power status LED. Power the board via either a terminal block or servo style connector. The 3V and GND pins are broken out to solder pads, allowing external devices to be powered. Code it with MicroPython via an editor such as the Thonny editor. When used with a stepper motor, half-stepping is supported - but not micro-stepping.
Compatible with:Raspberry Pi Pico
This Compact Robotics Board enables the Raspberry Pi Pico (connected via pin header) to drive 4 motors (or 2 stepper motors) and 8 servos. It also features 27 other I/O expansion points and Power and Ground connections. Please note, when used with a stepper motor, half-stepping is supported - but not micro-stepping.
The Robotics Board features 2 Dual H Bridge Motor Driver ICs. These are capable of driving 2 standard motors or 1 stepper motor each, with full forward, reverse, and stop control. There are also 8 servo outputs, capable of driving standard and continuous rotation servos. They can all be controlled by the Pico using the I2C protocol, via a 16-channel driver IC. The IO break-out provides connections to all the unused pins on the Pico. The 27 available I/O pins allow other devices, such as sensors or ZIP LEDs, to be added to the board.
Power is provided via either a terminal block or servo-style connector. The supply is then controlled by an on/off power switch to the board and there is also a green LED to indicate when the board has power. The board then produces a regulated 3.3V supply which is fed into the 3V and GND connections to power the connected Pico. This removes the need to power the Pico separately. The 3V and GND pins are also broken out on the header, which means external devices can also be powered.
To use the robotics board, the Pico should be firmly inserted into the dual row pin socket on the board. Ensure the Pico is inserted with the USB connector at the same end as the power connectors on the robotics board. This will allow access to all of the board functions and each pin broken out.
Note Due to the additional current draw of a Pico W's wireless features it is not recommended to use the wireless functionality with this board. The Pico's W standard functionality will work as normal only the wireless functions are affected.
Features:
Compatible with:
€24.95
MonkMakes Illuminata LED Bulb for Pi Pico
MONK 098
This board is designed to make it easy to attach a high-brightness bulb to a Raspberry Pi, Pico, Arduino, ESP32 or other microcontrollers.
Most microcontrollers and single board computers (SBCs) like the Raspberry Pi have digital outputs that can only supply a current of a few milliamps. This means that you can only use them with low-power LEDs, but if you want to control a high-power LED light bulb then you need to use the microcontroller or SBC's output pin to switch the LED light bulb on and off (using a transistor).
The illuminata includes a transistor to switch its three high-brightness LEDs on and off. This is why the Illuminata has three pins. Two are for power and the third is the control pin that switches the lamp on and off.
Features3V to 6V operation. Built-in MOSFET for PWM and on/off control Pre-soldered pin headers (GND, Control and +V) Breadboard friendly Laser-cut diffuser (superglue required) Cool Aluminum PCB M2.5 mounting holes
Compatible with:Raspberry Pi Pico
Most microcontrollers and single board computers (SBCs) like the Raspberry Pi have digital outputs that can only supply a current of a few milliamps. This means that you can only use them with low-power LEDs, but if you want to control a high-power LED light bulb then you need to use the microcontroller or SBC's output pin to switch the LED light bulb on and off (using a transistor).
The illuminata includes a transistor to switch its three high-brightness LEDs on and off. This is why the Illuminata has three pins. Two are for power and the third is the control pin that switches the lamp on and off.
Features
Compatible with:
€5.95
Kitronik Simply Robotics Motor Driver Board for Raspberry Pi Pico
KI 5348
Make the RiPi Pico the hub of your next robot/buggy project with The Kitronik Simply Robotics Board for Raspberry Pi Pico.
The Kitronik Simply Robotics Board for Raspberry Pi Pico features 2 Dual H-Bridge Motor Driver ICs (capable of driving 2 brushed motors or 1 stepper motor) and 8 servo outputs (capable of driving standard and continuous rotation servos), all controlled from a Raspberry Pi Pico. The Raspberry Pi Pico is not included.
The Motor Driver ICs are capable of up to 1A per channel and can drive a variety of small motors, such as hobby motors and more. They feature built-in protection for overcurrent, which can be reset by power cycling the board. The board features standard 3-pin servo connectors which allow for servos to be plugged straight in without the need for additional adaptors or soldering.
The IO breakout provides connections to 5 GPIO pins, including the Analogue inputs on the Pico. These IO points allow input devices, for example, sensors, or output devices, such as ZIP LEDs, to be added to the board. The board also features 3 x holes for mounting the board to a surface or custom enclosure, the mounting holes are 3.3mm in diameter (M3 clearance).
Power is provided via a terminal block. The supply is controlled by an on/off power switch to the board. There is a green LED to indicate when the board is turned on. The board then produces a regulated supply which is fed into the connected Pico, removing the need to power the Pico separately. There are 3V and GND pins broken out on the additional header, which means external devices can also be powered.
Note:This board is capable of continuous use at high currents. During such use, it may become hot.
Features:Control up 8 servos and two motors (or a stepper motor) simultaneously with the Raspberry Pi Pico. The board requires a Pico with headers attached Ample IO for advanced robotics projects. The onboard servo connectors are standard 3-pin servo connectors. The board also features 5 GPIO pins, including the Analogue inputs on the Pico. These IO points allow input devices, for example, sensors, or output devices, such as ZIP LEDs. Power is provided via a terminal block power input connector, with an on/off switch and power status LED. The Simply Robotics board will power all of the attached servos and provide the attached Pico with a regulated 3V supply. Additionally, there is built-in reverse polarity protection.
Dimensions:Length: 63mm. Width: 42mm. Max Height: 10mm. Mounting Holes Diameter: 3.3mm (M3)
Compatible with:Raspberry Pi Pico
The Kitronik Simply Robotics Board for Raspberry Pi Pico features 2 Dual H-Bridge Motor Driver ICs (capable of driving 2 brushed motors or 1 stepper motor) and 8 servo outputs (capable of driving standard and continuous rotation servos), all controlled from a Raspberry Pi Pico. The Raspberry Pi Pico is not included.
The Motor Driver ICs are capable of up to 1A per channel and can drive a variety of small motors, such as hobby motors and more. They feature built-in protection for overcurrent, which can be reset by power cycling the board. The board features standard 3-pin servo connectors which allow for servos to be plugged straight in without the need for additional adaptors or soldering.
The IO breakout provides connections to 5 GPIO pins, including the Analogue inputs on the Pico. These IO points allow input devices, for example, sensors, or output devices, such as ZIP LEDs, to be added to the board. The board also features 3 x holes for mounting the board to a surface or custom enclosure, the mounting holes are 3.3mm in diameter (M3 clearance).
Power is provided via a terminal block. The supply is controlled by an on/off power switch to the board. There is a green LED to indicate when the board is turned on. The board then produces a regulated supply which is fed into the connected Pico, removing the need to power the Pico separately. There are 3V and GND pins broken out on the additional header, which means external devices can also be powered.
Note:This board is capable of continuous use at high currents. During such use, it may become hot.
Features:
Dimensions:
Compatible with:
€17.00
Payment options
