RASPBERRY PI STORAGE & CONNECTIVITY

This 175mm long GPIO (general purpose input/output) ribbon cable lets you extend the reach of your Raspberry Pi's pins, bridging them out to other boards or PCBs. The Raspberry Pi's GPIO can be used for all sorts: twiddling pins on or off, providing 3.3V or 5V power, communicating with I2C or SPI devices, and much more. This cable gives you a bit more flexibility in where you route those signals.

175mm long x 51mm wide

40 wires, 2x20 pin female connectors

Pin 1 is marked by the white/pink wire

Note: Be careful to connect this cable to your board the correct way around. You can't use it with a male header to connect to a HAT's female header, as the pins will be mirrored. You'll risk damaging both your board and your Raspberry Pi if you connect the cable incorrectly so, if in doubt, check the order of the pins on the connector with a multimeter before connecting things up!

Compatible with:

Raspberry Pi 4

Raspberry Pi 5

Expand your Raspberry Pi 5’s storage and performance with the Pimoroni NVMe Base Duo. This clever add-on lets you connect two M.2 NVMe SSDs to your Pi 5 for fast, reliable data access—ideal for advanced projects and servers.

The Pimoroni NVMe Base Duo is a high-performance add-on board designed exclusively for the Raspberry Pi 5. It connects via the Pi 5’s PCIe FPC connector, enabling direct, high-speed NVMe SSD storage. With support for two M.2 NVMe drives, you can easily expand storage capacity, improve data throughput, or set up mirrored configurations for resilience.

A built-in power management circuit and efficient thermal design ensure stable operation, even under sustained load. The board mounts neatly underneath your Raspberry Pi 5 using supplied hardware, keeping your setup compact and tidy.

Perfect for:

File and media servers

Databases or network storage

AI and data-logging applications

Fast-boot Raspberry Pi desktops

Optimise data transfer speeds on your Raspberry Pi computer with an official Raspberry Pi SD Card. Rigorously tested to ensure optimal performance on Raspberry Pi computers, these Class A2 microSD cards help ensure you get the smoothest user experience from your device.

Documents:

Raspberry Pi SD Cards Offical Product Brief

The Raspberry Pi 5 includes two MIPI connectors designed for camera modules or displays. These connectors are more compact than those on previous Raspberry Pi models, so an adapter cable is required to connect your camera module.

Cable length: 200mm

These adapter cables feature a 22-pin, 0.5mm-pitch connector on one side for the Raspberry Pi 5, and a 15-pin, 1mm-pitch connector on the opposite side.

These camera cables DO NOT work with DSI displays.

The Raspberry Pi 5 provides two MIPI connectors to use with displays (DSI) or camera modules. These connectors are smaller than previous generations of Raspberry Pi, so you'll need one of these adapter cables to use your Raspberry Pi touchscreen display.

These camera cables DO NOT work with DSI displays. You'll need a different cable for displays - they are not interchangeable!

These camera adapter cables have a 22-way 0.5mm-pitch connection at one end (for the Raspberry Pi 5 end), and a 15-way 1mm-pitch connector at the other (for your camera). These cables have CAMERA clearly printed on them so that you don't get them mixed up with the very similar-looking display cables.

Features

Camera adapter cable for Raspberry Pi 5

For use with camera modules only (not compatible with DSI displays)

22-way 0.5mm pitch to 15-way 1mm-pitch

FPC cable (Flexible Printed Circuit)

CAMERA printed on the cable body for easy identification

Length : 200mm

Compatible with:

Raspberry Pi 5

The official Raspberry Pi micro HDMI to standard HDMI (A/M) cable designed for the Raspberry Pi 5 and Raspberry Pi 4 Model B.

Ideal for setting up a dual-screen display with the latest Raspberry Pi 5 or Raspberry Pi 4.

Please note: this HDMI cable is not compatible with the Raspberry Pi 2, 3 or Zero.

Length : 1m

Compatible with:

Raspberry Pi 4

Raspberry Pi 5

The MicroSD to SD Card Adapter – perfect for use with your Raspberry Pi!

Easily convert your MicroSD card into a standard-sized SD card, making it compatible with PC and laptop SD card readers. Ideal for flashing a new operating system using Raspberry Pi Imager.

Compatible with:

Raspberry Pi 4

Raspberry Pi 5

Raspberry Pi Pico

Raspberry Pi Zero

ML2020 Manganese Rechargeable Lithium Battery for powering Raspberry Pi 5's real-time clock. Supplied with a pre-fitted two-pin JST plug to connect to Raspberry Pi 5's dedicated RTC battery connector.

Add super-fast storage to your Raspberry Pi 5 allowing for lightning fast boots, NAS use, and snappy applications! NVMe Base is a PCIe extension board for Raspberry Pi 5. Simply populate it with an M-key NVMe SSD (2230 to 2280 sizes supported) and mount it under your Pi for a compact and fast storage solution - It even comes with rubber feet!

It's the perfect solution for turning your Raspberry Pi 5 into a file server, media centre, reverse proxy, etc. - really any task that benefits from large amounts of fast storage, especially with random high operations per second (IOPS) workloads. In short it's a game changer!

NVMe base follows the new "PIP" design guidelines provided by Raspberry Pi ensuring that it will be easy to use and be supported long term by updates to Raspberry Pi OS - though it is very early days and things are improving rapidly there!

Base Kit

NVMe Base PCB with M.2 Slot (M-Key)

'PCIe Pipe' Flat Flex Cable

4x Rubber feet

M2 bolt and 2x nuts for SSD mounting

4x 7mm M2.5 standoffs for base mounting

8x short M2.5 bolts for base mounting

4x long M2.5 bolts for 'pass-thru' mounting with a HAT

Compatible with:

Raspberry Pi 5

SSD card for use is the Verbatim Vi3000 PCIe NVMe M.2 SSD 256GB