SCISSORS, KNIVES & BLADES

Optimised for safety and designed for use by children

Blade is ruled in centimetres and millimetres

Ideal for topping up classroom supplies or for use at home

Approx. 133mm or 5.25 inches long

Left handed

Cut V‑grooves

Adjustable blade depth

Quick change blade clips

Magnetic blade slot

On‑board blade storage drawer

Use with Cos‑Tools Channel Rail, Adapt‑A‑Rule, Team System

For use on various EVA foams

Looking for replacement FoamWerks blades for your FoamWerks straight cutter, bevel cutter, rabbet or v-groove cutter?

The WA blade fits the Circle Cutter.

Looking for replacement FoamWerks blades for your FoamWerks straight cutter, bevel cutter, rabbet or v-groove cutter?

The WB blade fits the Freestyle Cutter

Looking for replacement FoamWerks blades for your FoamWerks straight cutter, bevel cutter, rabbet or v-groove cutter?

The WC style blade fits the:

WC-6001 Straight Cutter, Straight/Bevel Cutter

WC-4010 Rabbet Cutter

WC -2001 V-Groove Cutter

For use with various FoamWerks tools including the WC2001 FoamWerks V‑Groover and WC6001 FoamWerks Straight Cutter which can "hook" onto the W3001 Channel Rail to better guide the tool for straighter cuts.

This FoamWerks Channel rail is a 32" (81cm) aluminum rail with rubberized strips to help hold things in place and is scaled on one side with a raised edge on the other to allow some FoamWerks tools to "hook" on for use.

Cut perfect circles from 1″ to 6″ (2.5cm to 15.25cm) diameters. Center depth indicator shows blade progression for board depths from 1/8″ to 1/2″ (3.1mm to 12.7mm). Features dual inch/metric rail, centering pin, magnetic blade slot and clear acrylic safety dome. The circle cutter includes five blades. Use replacement blades WA-5

IMPORTANT: Always use a scrap piece of foam board underneath the piece you are cutting. This is to protect the tool and extend the life of the blades.

Colour may vary

 

Cut perfect straight edges on any depth of foam board from 1/8″ to 1/2″ (3.1mm to 12.7mm). FoamWerks Straight Cutter features adjustable blade depth, quick-change blade clip, magnetic blade slot, on-board blade storage drawer and five blades.

Use with FoamWerks Channel Rail, Logan Adapt-A-Rule or Team System. Use replacement blades WC-5 or WC-20.

IMPORTANT: Always use a scrap piece of foam board underneath the piece you are cutting. This is to protect the tool and extend the life of the blades.

Colour may vary

Economy and versatility combine in the FoamWerks Straight/Bevel Cutter. Simply rotate the angled base block and Model WC-6010 transforms from a straight cutter to a bevel cutter. Features include adjustable blade depth, ergonomic handle and on-board blade storage.

The Straight/Bevel Cutter works with 3/16″ (5mm) foam board. The Straight/Bevel Cutter includes two blades and can be used with any suitable straight edge. Use replacement blades WC-20.

Colour may vary

IMPORTANT: Always use a scrap piece of foam board underneath the piece you are cutting. This is to protect the tool and extend the life of the blades.

These Craft Knives have retractable, snap-action blades. Each cutter has a built-in safety snapper for changing the blade ends. The blades can be easily replaced.

The ideal knife for use on paper film etc… comes fitted with lock to hold the blade in position.
9mm
Supplied in wallet.

This Knife is ideal for use on card, foamboard, carpet etc. Comes fitted with lock to hold the blade in position

Comes with two spare blades supplied in wallet
18mm

The Isomars C20 cutter, a versatile companion for precise cuts.

Large - 20cm

Ensures sharpness never slumps or slacks.

With ergonomic design, it fits snugly in hand,

Enabling effortless crafting, as creativity expands.

The Isomars C20 cutter, a versatile companion for precise cuts.

Small - 9cm

Ensures sharpness never slumps or slacks.

With ergonomic design, it fits snugly in hand,

Enabling effortless crafting, as creativity expands.

Paper Cutter with 4 Spare Blades, 14cm

Jakar replacement rotary cutter blade for the 45mm cutter

Very sharp, round blades for cutting in a straight line with a ruler or for use freehand. The blades cut paper, vinyl, leather, and fabric. Use with a cutting mat. Contains 1 blade.

The Jakar Compass Cutter, a precision tool for creatives. Cuts circles and arcs with finesse, unlocking artistic narratives.

Cuts perfect circles

Cuts circles from 1cm to 15cm in diameter

For cutting paper, film, rubber, leather etc

Includes six spare blades and two pencil leads stored in the handle

Compass Cutter Blades 7365B for use with Jakar Compass Cutter ref 7339

12 blades plus 2 leads

Handle with care - extremely sharp

The Jakar Craft Knife features a comfortable cushion grip for easy handling, making it perfect for precise cutting of paper, card, foam, and more. It comes with five spare blades and offers the convenience of replacement blades, which are also available for purchase.

Cutting knife, plastic, heavy duty, large with snap-off blades and auto-lock.

Jakar Spare Blades

For 7333 scalpel

Includes 5 blades

Pack of 5 spare blades in plastic case to suit Jakar 7312 & 7313 Knives

Jakar Heavy Duty Hobby Knife

Hobby knife heavy duty aluminum with handle ideal for cutting of lightweight materials. Paper, plastic, balsa, film, cloth, and foil.

Jakar Five Large Snap Off Blades

Jakar Snap off Blades for retractable craft knives for 7332 Knife

Mount Cutter, with two cutting angles 45° and 90° for use with 7322 aluminum ruler.

Contains two blades plus three spare blades, cuts materials up to 7mm thick