SG A2 Drawing Board Trolley Set of 15

Keep all your tools tidy and packed away Overall Size: 75 x 50 x71 (86)cm Made from Beech wood Carton Size: 76 x 54 x 68cm

We have designed this pegboard accessory as part of our Makerspace Furniture system to meet the growing demands and requirements of teaching STEAM education. This modular system allows us to provide simple solutions in the form of stand alone units, or more comprehensive solutions in the form of modules that will combine to outfit a complete space.

The SG Makerspace will:

Maximise the use of available space.

Provide a safe, easy to manage ,shareable learning and making environment.

Simplify tool and material storage as well as equipment placement.

Allow for growth and development.

We set out to create a simple ,robust and flexible storage solution that was easily configurable. The Bookprop can be used to end a shelf of books. The full spec for this shelf accessory is:

Depth 178mm

Height 220mm

2mm mild steel with matt black coating.

Screws into shelf.

We have designed this pegboard accessory as part of our Makerspace Furniture systemto meet the growing demands and requirements of teaching STEAM education. This modular system allows us to provide simple solutions in the form of stand alone units, or more comprehensive solutions in the form of modules that will combine to outfit a complete space.

The SG Makerspace will:

Maximise the use of available space.

Provide a safe, easy to manage ,shareable learning and making environment.

Simplify tool and material storage as well as equipment placement.

Allow for growth and development.

We set out to create a simple ,robust and flexible storage solution that was easily configurable. The pegboard wall panel with CNC cut slots allows for fast set up and easy changing of the arrangement of accessories such as hooks, boxes, shelves and tool bars.

The full spec for this box shelf accessory is:

Depth 190mm

Width 443mm

95mm high 12mm thick plywood rim

18mm birch plywood shelf with 2 CNC cut and glued brackets

Sanded and lacquered.

Slots into pegboard with no further fittings.

We have designed this worktop as part of our Makerspace Furniture system to meet the growing demands and requirements of teaching STEAM education. This modular system allows us to provide simple solutions in the form of stand alone units, or more comprehensive solutions in the form of modules that will combine to outfit a complete space.

The SG Makerspace will:

Maximise the use of available space.

Provide a safe, easy to manage ,shareable learning and making environment.

Simplify tool and material storage as well as equipment placement.

Allow for growth and development.

If you would like to have a fixed unit that will accommodate the Snapmaker A350T 3 in 1 3D Printer Bundle then you will need a deeper worktop to allow for the size of the enclosure. You can order the deep top which is 690mm instead of the standard 590mm to cater for the footprint of the enclosure.

Made in Ireland, this worktop from Paltech demonstrates how technology can assist to close the loop on repurposing post consumer mixed waste plastic packaging for use in products with a long lifespan.

We have designed this fixed worktop/storage unit as part of our Makerspace Furniture system to meet the growing demands and requirements of teaching STEAM education. This modular system allows us to provide simple solutions in the form of stand alone units, or more comprehensive solutions in the form of modules that will combine to outfit a complete space.

The SG Makerspace will:

Maximise the use of available space.

Provide a safe, easy to manage ,shareable learning and making environment.

Simplify tool and material storage as well as equipment placement.

Allow for growth and development.

This fixed unit is ideal for equipment such as the Flux Laser Beambox Pro or the Cricut Maker 3.The full spec is as follows:

18m film faced plywood with 2 doors , rim locks and black D-handles.

16mm Paltech recycled worktop (made in Ireland).

6 internal shelves on moveable steel pins.

Black plastic cable outlets to the top to tidy cables inside to power supply (available separately)

Black powder coated steel legs.

Made in Ireland, the worktop from Paltech demonstrates how technology can assist to close the loop on repurposing post consumer mixed waste plastic packaging for use in products with a long lifespan.

We have designed this fixed worktop/storage unit as part of our Makerspace Furniture system to meet the growing demands and requirements of teaching STEAM education. This modular system allows us to provide simple solutions in the form of stand alone units, or more comprehensive solutions in the form of modules that will combine to outfit a complete space.

The SG Makerspace will:

Maximise the use of available space.

Provide a safe, easy to manage ,shareable learning and making environment.

Simplify tool and material storage as well as equipment placement.

Allow for growth and development.

This fixed unit is ideal for equipment such as the Flux Laser Beambox Pro or the Cricut Maker 3and is designed to simplify storage of sheet materials with the use of vertical dividers.
The full spec is as follows:

18m film faced plywood with 1door, rim locks and black D-handles.

16mm Paltech recycled worktop (made in Ireland).

3 internal shelves on moveable steel pins.

2 vertical dividers on right hand side to house sheet materials for laser cutting etc.

150mm cover allowing access to 120mm opening for extractor pipe. If an extractor pipe is inserted, then this unit must be the last unit in line.

Black plastic cable outlets to the top and side to tidy cables inside to power supply (available separately)

Black powder coated steel legs.

Made in Ireland, the worktop from Paltech demonstrates how technology can assist to close the loop on repurposing post consumer mixed waste plastic packaging for use in products with a long lifespan.

We have designed this fixed worktop/storage unit as part of our Makerspace Furniture system to meet the growing demands and requirements of teaching STEAM education. This modular system allows us to provide simple solutions in the form of stand alone units, or more comprehensive solutions in the form of modules that will combine to outfit a complete space.

The SG Makerspace will:

Maximise the use of available space.

Provide a safe, easy to manage ,shareable learning and making environment.

Simplify tool and material storage as well as equipment placement.

Allow for growth and development.

This fixed unit is similar to SG MS005 but has a height of 942mm rather than730mm, which makes it ideal for 3D printing equipment such as the Flashforge Adventurer 4 or the Ultimaker S5 3d-printer.
The full spec is as follows:

18m film faced plywood with 2 doors , rim locks and black D-handles.

16mm Paltech recycled worktop (made in Ireland).

8 internal shelves on moveable steel pins with profile to allow cable distribution.

Black plastic cable outlets to the top and side to tidy cables inside to power supply (available separately)

Black powder coated steel legs.

Height of 942mm

Made in Ireland, the worktop from Paltech demonstrates how technology can assist to close the loop on repurposing post consumer mixed waste plastic packaging for use in products with a long lifespan.

We have designed this pegboard accessory as part of our Makerspace Furniture system to meet the growing demands and requirements of teaching STEAM education. This modular system allows us to provide simple solutions in the form of stand alone units, or more comprehensive solutions in the form of modules that will combine to outfit a complete space.

The SG Makerspace will:

Maximise the use of available space.

Provide a safe, easy to manage ,shareable learning and making environment.

Simplify tool and material storage as well as equipment placement.

Allow for growth and development.

We set out to create a simple ,robust and flexible storage solution that was easily configurable. This longer pegboard hook will slot straight into the pegboard without any need for further securing and is ideal for bespoke shelving.
The full spec for this shelf accessory is:

Depth 180mm

18mm birch plywood.

Sanded and lacquered.

Slots into pegboard with no further fittings.

Can be made in-school as a project.

We have designed this pegboard accessory as part of our Makerspace Furniture system to meet the growing demands and requirements of teaching STEAM education. This modular system allows us to provide simple solutions in the form of stand alone units, or more comprehensive solutions in the form of modules that will combine to outfit a complete space.

The SG Makerspace will:

Maximise the use of available space.

Provide a safe, easy to manage ,shareable learning and making environment.

Simplify tool and material storage as well as equipment placement.

Allow for growth and development.

We set out to create a simple ,robust and flexible storage solution that was easily configurable. This pegboard hook will slot straight into the pegboard without any need for further securing and can be used to create custom projects.
The full spec for this shelf accessory is:

Depth 67mm

18mm birch plywood.

Sanded and lacquered.

Slots into pegboard with no further fittings.

Can be made in-school as a project.

We have designed this pegboard accessory as part of our Makerspace Furniture system to meet the growing demands and requirements of teaching STEAM education. This modular system allows us to provide simple solutions in the form of stand alone units, or more comprehensive solutions in the form of modules that will combine to outfit a complete space.

The SG Makerspace will:

Maximise the use of available space.

Provide a safe, easy to manage ,shareable learning and making environment.

Simplify tool and material storage as well as equipment placement.

Allow for growth and development.

We set out to create a simple ,robust and flexible storage solution that was easily configurable. This pegboard hook will slot straight into the pegboard without any need for further securing and has multiple uses including shelves, supporting boxes and spools.

The full spec for this shelf accessory is:

Depth 127mm

18mm birch plywood.

Sanded and lacquered.

Slots into pegboard with no further fittings.

Can be made in-school as a project.