Ultimaker S6 3D Printer Flex Plate

The Einstar Handheld 3D Scanner delivers fast, accurate and full-colour 3D scanning in a compact, affordable device — perfect for classrooms, makers, engineers and digital creators

The Flashforge AD5X is a next-generation, high-speed, multi-colour FDM 3D printer, combining an intelligent filament switching (IFS) system, a temperature-controlled chamber, and an open yet stable frame. It delivers professional multicolour prints without bleeding, thanks to automated nozzle purging and precise movement control. Suitable for PLA, PETG, TPU (including 95A), and other standard materials, the AD5X is geared toward creators, educators, and prototyping professionals who demand vibrant, reliable prints.

This 3D Printer includes an Enclosure Kit that requires assembly. For the Flashforge AD5X Enclosure Installation Guide, please click here.

Key Features:

4-colour multi-material printing (automatic switching)

Max nozzle temp 300 °C, heated bed up to 110 °C MatterHackers +3

Print speed up to 600 mm/s, acceleration to 20,000 mm/s²

Build volume: 220 × 220 × 220 mm

Auto-leveling, filament run-out detection, power-loss recovery

Connectivity: Wi-Fi (5G & 2.4G), Ethernet, USB

Please note our product consultant recommends the use of Flashforge High Speed PLA with this machine.

The Flashforge Adventurer 3 is a fully enclosed, plug-and-print 3D printer with a 150 x 150 x 150 mm build volume, ideal for classrooms, makerspaces and home use. With auto-calibrated printing, a removable flexible heated bed, quick-swap nozzle and built-in Wi-Fi and camera, it delivers reliable, quiet and safe 3D printing for beginners and experienced users alike.

The Flashforge Adventurer 5M Pro combines cutting-edge speed with intelligent design, offering a smooth and safe 3D printing experience for homes, classrooms, and offices. With a fully enclosed chamber, advanced filtration, and smart connectivity, this printer is built to perform efficiently—without compromising on quality or safety.

Key Features:

Lightning-Fast Printing:
Print larger projects in less time with speeds up to 600mm/s and acceleration up to 20,000mm/s². Ideal for rapid prototyping or multi-part builds.

High-Performance Nozzle:
A 280°C maximum nozzle temperature and 32mm³/s flow rate make it compatible with a range of materials, including PLA, PLA-CF, TPU, ASA, and ABS.

Safe Enclosed System:
The fully enclosed build chamber, combined with dual HEPA and activated carbon filters, captures over 99% of ultrafine particles and VOCs—keeping your workspace clean and safe.

Real-Time Monitoring:
A built-in HD camera lets you track progress remotely and create time-lapse videos for effortless project documentation and sharing.

Smart Device Management:
Control multiple printers through FlashMaker software. Centralised control streamlines workflows, especially in busy classrooms or maker labs.

Power-Loss Recovery:
In the event of a power cut, the printer automatically resumes from where it left off—no reprints, no wasted filament.

The Snapmaker A350T 3-in-1 is a powerful modular machine that combines 3D printing, laser engraving & cutting, and CNC carving in one professional desktop system. With a large 320 × 350 × 330 mm build volume, ultra-quiet operation, improved speed and precision, and an all-metal frame, it’s the ideal all-round fabrication tool for schools, makerspaces and advanced hobbyists.

The Ultimaker S3 replaced the Ultimaker 3 from April 2020.  It can print an enormous range of materials including composites, engineering plastics and nylon. It is engineered to print continuously, with maximum uptime, reliably. No other Ultimaker 3D printer packs so much capability into such a cost-effective package 3D printing has long been synonymous with fabricating exceptional parts and models – but repeatability has always been a challenge. Not anymore.

Ultimaker has perfected first layer adhesion with the S3, which scans the build plate and corrects any microscopic discrepancies within the Z-height. The result is a perfect first layer for perfect adhesion and stability on the build plate. The S3’s build area is 230 x 190 x 200 mm which is down on the S5, but you have to remember this is a more compact 3D printer. It has an assembled size of 394 x 489 x 637 mm, which is around the same size as a laser jet. In other words, it’ll fit on a computer desk quite comfortably - filament tubes and all.

The S3 benefits from dual extrusion technology with Ultimaker swappable print cores, which enable you to easily switch between abrasive, non-abrasive and low and high-temp materials. The S3 is compatible with the complete Ultimaker material library, including TPU 95A, CPE+, Tough PLA, PVA and Breakaway. You can also print with glass and carbon fibre composites. All you need is the Print Core CC Red and you’ll be able to print up to 10kg of carbon fibre. Overall, the S3 is an outstanding 3D printer. It’s suitable for any application -- industrial or educational

The Ultimaker S7 is a high-performance professional 3D printer designed for reliable, industrial-quality results. With automatic bed levelling, an enclosed build chamber, HEPA air filtration and a flexible build plate, the S7 delivers exceptional print accuracy with minimal setup. Perfect for engineering, education, product design and prototyping.

Best-in-class reliability We took everything our users loved about the award winning UltiMaker S5, and we made it even better. The UltiMaker S7 can be trusted to do its job, giving you the freedom to do yours.



Automatic material handling:
Designed to be left unattended, the Material Station allows the UltiMaker S7 to 3D print longer – day or night. Loading material into the Material Station takes seconds – not minutes. Simply open the door and drop the spool into a bay. During a print, any spool not in use can be switched out.

Hassle-free storage:
Every spool is kept below 25% relative humidity, making it easy to realize more 3D printing applications with almost any combination of polymers and abrasive composites. Each of the Material Station's material bays have NFC readers and reinforced prefeeders for integration with UltiMaker Cura and Digital Factory.

Integrated Air Manager:
Not only does this increase air quality peace of mind... It also boosts print quality thanks to its fully enclosed build chamber and single glass door.

Flexible build plate

Inductive sensor

Cura integration

Backwards file compatibility

Anti-flood sensory