VEX 2x Beam Long Pack (Base)

This kit contains all the Field & Game Elements required for the 2024 - 2025 VEX IQ Competition Game, Rapid Relay.

Note: VEX IQ Competition Field Perimeter & Tiles are not included with this Kit. Must be added separately

Compatible with IQ products and accessories.

The 2x Beam Foundation Add-On Pack includes additional 2x beams, great for adding structural support to VEX IQ robots.
(4) 2x2 Beam
(2) 2x4 Beam
(2) 2x6 Beam
(2) 2x8 Beam
(2) 2x10 Beam
(2) 2x12 Beam
(4) 2x16 Beam
(2) 2x20 Beam

Note:The base color for the 2x Beam Foundation Add-On Pack (228-3518) is dark grey.

This kit has motion components for creation of advanced mechanisms. Transfer motion 90-degrees "around corners" using bevel gears, or add a differential to your drivetrain. Includes structural elements to enable your build!

4 x Spare VEX GO Field Walls. (Tile not included)

Works with VEX GO, VEX IQ & VEX EXP

These kits contain all the parts needed to convert a 1st Generation VEX IQ Kit to a 2nd Generation Education Kit, minus the electronics. Structural and Motion parts only.

Great for those that already have 1st Generation electronics!

Please note: If you are looking to upgrade to a 2nd Generation Education Kit, you will only need to purchase VEX 2288657. If you'd like to upgrade to a 2nd Generation Competition Kit, you will also need to purchase VEX 2287597.

These Omni-Directional wheels roll forward like normal wheels but slide sideways with almost no friction (no skidding during turns). Use these wheels to make your robot turn smoothly or build a holonomic drive train. Diameter approx. 62mm Travel: 200mm (distance covered in 1 revolution) Omni-Directional Wheels roll sideways with very little friction Minimize skidding during turns Made from ABS plastic Rollers are soft rubber-coated ABS

All the Field Elements ; Game Objects needed to build a complete VIQC Slapshot field. One Full Field Set. Note:VEX IQ Challenge Field Perimeter ; Tilesare not included with this Kit. Must be added separately. Includes: 45 Discs All Needed Parts for Field Assembly

This controller packages analog joysticks and buttons into a familiar video-game style design. A rechargeable battery ensures enough charge to get you through multiple class periods or a full day of competition. Two analog joysticks and ten buttons Built-in Bluetooth 5.0 Radio Wireless pairing to the Robot Brain Wirelessly download programs from VEXcode via USB-C Start and stop programs from the controller Integrated rechargeable battery USB-C Rechargeable - Battery included

The VEX Pin Tool makes working with VEX GO and VEX IQ pins and plastic even easier. Use the Pin Tool just as you would a pair of pliers. Simply place the tool over the pin you want to remove, squeeze, and pull!

The Pin Tool has two other useful features on its handles. One side can be used to pry two beams apart, while the other can be used to push out pins (such as a 0x2 capped connector) that the tool would normally not be able to grab.

Plastic Shaft Base Pack The Plastic Shaft Base Pack contains various length shafts for different purposes and pitches your design may require. This pack is included in all VEX IQ Starter Kits and Super Kits. (6)1x1 Idler Pin (6)0x2 Idler Pin (2)2x Pitch Plastic Shaft (2)3x Pitch Plastic Shaft (2)4x Pitch Plastic Shaft (2)5x Pitch Plastic Shaft (2)2x Pitch Plastic Motor Shaft (4)3x Pitch Plastic Motor Shaft (2)4x Pitch Plastic Motor Shaft (2)2x Pitch Plastic Capped Shaft (4)3x Pitch Plastic Capped Shaft (2)4x Pitch Plastic Capped Shaft (2)5x Pitch Plastic Capped Shaft Note:The base color for the Plastic Shaft Base Pack (228-3620) is black.