VEX V5 VRC Over Under Scoring Element Kit - Single

VEX Synthetic Rubber Bands have dozens of uses on a robot. Their spring-like properties make them perfect for latches, triggers, and return mechanisms. Size:3" x 1/8" (76mm x 3mm)

Kit 2 is a complete pneumatics add-on for VEX EDR. The cylinders are Double Acting, meaning they use air pressure to extend and retract the piston.

Uses one VEX EDR Controller I/O port per air cylinder. Reservoir is filled using a standard tie pump

Kit Includes:
2x Solenoid Driver - Cable w/Driver, Connects one VEX EDR I/O Port to one Solenoid
1x Tire Pump Fitting - Shraeder Valve With 4mm Tube Fittings - 8090410075
1x Reservoir - Reservoir, 1-1/2" X 4", w 1/8"NPT & M5 port - US14227-S0400
1x On/Off Switch - Finger Valve - VHK3-04F-04F
1x Pressure Regulator - Mini Regulator w/ 4mm Fittings - A-474-0000005
1x "T" Fitting - "T" Fitting for Valves - KQ2T04-00 or "-00A"
2x Cylinder, Bi-directional - Dbl Acting Cylinder 10mm Bore - NCJ2D10-200
2x Solenoid, Fwd, Reverse - 5/2 Single Solenoid Valve, 5VDC - SYJ3120-SMO-M3-F
2x Flow Meter - M5 elbow meter out flow control 4mm tubing - AS1201F-M5-04T
6x Fitting for Valves - Fitting 4mm Tubing x M3 Thread - KJS04-M3 or "-M3G"
1x Fitting for Reservoir - 1/8 X 4mm Male Connector To Reservoir - KQ2H03-34S or "-34AS"
2x Fitting for Cylinders - M5 Male Connector for Cylinders - KQ2S04-M5 or "-M5A"
1x Tubing - 4mm X 1696mm Length Tubing - TUO425B-X81US1696
2x Cylinder Mount - Mount for Cylinder - CYLINDER-MOUNT
2x Cylinder Nut - Nut for the Cylinder Mount - CYLINDER-NUT
2x Cylinder Rod Pivot - Pivot for the Cylinder Rod - CYLINDER-ROD-PIVOT

This kit provides over five feet of heavy-duty tank treads, perfect for building tough robot tracks that can conquer any terrain. But that's not all! The kit also includes soft rubber pads for superior grip and special fins that help create efficient conveyor belts for scooping up objects. With this upgrade kit, the possibilities are endless!

Climb over obstacles.

Traverse tough terrain.

Drive through sandy or soft spongy surfaces.

Can be used for a robot conveyor belt.

Every section is a master link, create treads of any length.

Kit Contents:

170 x Tread Links

4 x Tank tread drive/idler wheels

4 x Double Bogie wheel assemblies

2 x Single Bogie wheel assemblies

12 x 8-32 x 1" Bogie wheel support screws

12 x Keps nuts

The perfect all-in-one kit for any newVEX Robotics Competition teamor an existing team looking to supercharge their robot.

This kit contains everything needed to get up and running with theV5 Control System, along with a variety of aluminum structural parts to build lighter and faster mechanisms, and theVision Sensorto see the competition from a whole new perspective.

Compete with over 11,000 worldwide VEX Robotics Competition teams
Build powerful mechanisms with the high strength gears, sprockets, and shafts included
Scalable programming software suite available with VEXcode

Take educational robotics to the next level by competing in the VEX Robotics Competition. The only limit to this open-ended building system is your own imagination!

The V5 Competition Starter Kit includes a complete V5 control system, aluminum structural elements, and high strength parts so that a team of students can build a bigger, stronger, and faster robot.

Compete with over 11,000 worldwide VEX Robotics Competition teams
Lightweight aluminum structure designed specifically for competition
Scalable programming software suite available with VEXcode
Recommended one competition team per kit.

Take your VEX robot to the next level with the V5 System Bundle. This bundle includes everything you need to get started with V5, and is engineered to provide the most advanced robotics experience, right at your fingertips.

Designed to scale from the classroom to the competition field
Includes all necessary components to get started with the V5 System
Scalable programming software suite available with VEXcode

This kit contains everything needed to get a classroom or VEX Robotics Competition team up and running with Pneumatics.

Pneumatics deliver fast and powerful linear motion that is useful in a variety of applications. Use pneumatics to power your robot's claw, intake deployment, or any mechanism that requires quick motion. In particular, pneumatics are useful in applications requiring only two positions (open/closed, up/down, etc.)

V5 Pneumatics Kit Contains:

1 x Pneumatic Tubing Cutter

1 x Dual Acting Cylinder, 10mm Bore, 25mm Stroke

1 x Dual Acting Cylinder, 10mm Bore, 50mm Stroke

1 x Dual Acting Cylinder, 10mm Bore, 75mm Stroke

1 x 4mm OD x 2.5mm ID PU Tubing (3m)

1 x Pneumatic Reservoir

1 x Pneumatic Hand Valve

2 x Double Action Solenoid Wire

2 x Dual Acting V5 Pneumatics Solenoids

1 x Pressure Regulator

1 x Pressure Regulator Bracket

1 x Pressure Regulator Pressure Gauge

1 x Pressure Gauge

10 x Straight Pneumatic Fittings

8 x 90 Deg. Elbow Pneumatic Fittings

5 x "T" Pneumatic Fittings

2 x 90 Deg. Elbow Pneumatic Fitting (Flow Control, M5, 4mm Hose)

10 x Pneumatic Fitting Plug

1 x Schrader Valve

1 x Straight Pneumatic Fitting (M5 Female, 4mm Hose)

2 x Manifold Assemblies

Everything starts with the V5 Robot Brain. Students and teachers can now run programs, troubleshoot their robot and get important feedback in real-time. Smart Ports automatically detect the type of connected device and handle motors and sensors interchangeably.

Other features include: 4.25” (108mm) full colour touch-screen Dashboards provide real-time diagnostics 21 Smart Ports Eight 3-Wire ports for analog and digital sensors Download programs wirelessly Programmable with VEXcode

Control your robot like never before with the cutting-edge V5 Controller. This controller packages two analog joysticks and 12 buttons into a familiar video-game style design. A rechargeable battery ensures enough charge to get you through multiple class periods or a full day of competition.

Other features include:

LCD Screen for real-time information

Start and stop programs from the controller

Programmable haptic feedback

Competition practice mode - sync up with other robots and run practice matches

Built-in VEXnet 3.0 radio and Bluetooth®

Integrated rechargeable battery

The V5 Robot Battery Li-Ion 1100mAh is the next evolution of the VEX EDR NiMh Battery, which will provide you consistent performance every time you power up your robot. This Lithium Iron Phosphate (LiFePO4) battery is equipped with circuitry and control to allow for higher sustained power and more reliable function. The V5 System as a whole is designed to produce identical motor performance at any battery charge level. This means that the same battery can be used for multiple competition matches or class periods before needing to be recharged. LiFePO4batteries are proven to offer longer life cycles, and are safer than Lithium Ion batteries.

Battery run time depends on many factors including your robot design, your driving, and the number of motors used. Robots' often get 30+ minutes of heavy drive time from a single charge. Competition teams should be able to use one Robot Battery for multiple matches without recharging. Remember that with V5, a low battery does not change the motor's performance.

Built-in charge indicator lights

Charge time is approximately one hour

Note: Battery power cable and charger not included. (Power cable ships withV5 Robot Brain)