Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Search
From the same category
SG Raspberry Pi Zero 2 WH Starter Kit
RP KIT ZERO 2WH
The kit includes a Raspberry Pi Zero 2 W with Header along with an official power supply, an Official Raspberry Pi Zero Case (including three lid options and a short camera cable), 32GB SanDisk MicroSD card with Raspberry Pi OS** pre-loaded, SD Card Adapter, 1m Mini-HDMI cable, OTB USB Adapters to connect your peripherals.
The included high-quality SanDisk 32GB MicroSD card is pre-loaded with the Raspberry Pi OS operating system, allowing you to get set up and start working on your project straight away!
€47.95
Flexible Tripod for Raspberry Pi High Quality Camera
PIM COM-B017
Light, flexible, and stable, the perfect partner for the Raspberry Pi High Quality Camera
The three flexible legs will hold your camera stable on your desk, or can be wrapped around a support for more unusual placements. The head is also on a ball joint, so the camera can be angled to get the perfect shot! Fitted with a standard 1/4"-20 camera mount the tripod will mate securely with the Raspberry Pi High Quality Camera, but can also be used with a wide variety of other products including GoPro. The rubber feet will keep your camera from sliding and the lightweight and compact construction makes this usefully portable.
Colour may differ from picture.
Compatible with:Raspberry Pi High Quality Camera
The three flexible legs will hold your camera stable on your desk, or can be wrapped around a support for more unusual placements. The head is also on a ball joint, so the camera can be angled to get the perfect shot! Fitted with a standard 1/4"-20 camera mount the tripod will mate securely with the Raspberry Pi High Quality Camera, but can also be used with a wide variety of other products including GoPro. The rubber feet will keep your camera from sliding and the lightweight and compact construction makes this usefully portable.
Colour may differ from picture.
Compatible with:
€5.55
Pimoroni Display HAT Mini for Raspberry Pi
PIM 589
A generous 2.0" (320 x 240) IPS LCD display for Raspberry Pi with lots of tasty baked in functionality.
Display HAT Mini features a bright 18-bit capable 320x240 pixel display with vibrant colours and formidable IPS viewing angles, connected via SPI. It's got four tactile buttons for interacting with your Pi with your digits and a RGB LED for notifications. Pimoroni have also squeezed in a QwST connector (Qwiic / STEMMA QT) and a Breakout Garden header so it's a doddle to connect up different kinds of breakouts.
It will work with any model of Pi with a 40 pin header, it goes with the Raspberry Pi Zero particularly well - Pimoroni have included a pair of standoffs so you can use to bolt HAT and Pi together to make a sturdy little unit. To accommodate the screen Display HAT Mini is a bit bigger than a standard mini HAT or pHAT - it's around 5mm taller than a Pi Zero (so a Mini HAT XL or a Mini HAT Pro, if you will).
Display HAT Mini lets you turn a Raspberry Pi into a convenient IoT control panel, a tiny photo frame, digital art display or gif-box, or a desktop display for news headlines, tweets, or other info from online APIs. This screen is a handy 3:2 ratio, useful for retro gaming purposes!
Features:2.0” 320x240 pixel IPS LCD screen, connected via SPI (~220 PPI, 65K colours) 4 x tactile buttons RGB LED Qw/ST (Qwiic/STEMMA QT) connector Breakout Garden / I2C header Pre-soldered socket header for attaching to Raspberry Pi Compatible with all models of Raspberry Pi with a 40 pin header. Fully assembled No soldering required (as long as your Pi has header pins attached). Dimensions: approx 65.5mm x 35mm x 9mm (W x H x D, includes header and display). With a Pi Zero attached with standoffs, the total depth is 17mm. Screen usable area: 40.8mm x 30.6mm (L x W) Pinout Schematic Dimensional drawing Display HAT Mini Python library ST7789 Python library
IncludesDisplay HAT Mini 2 x 10mm standoffs
Compatible with:Raspberry Pi 5 Raspberry Pi 4 Raspberry Pi Zero(but needs Male 40-pin 2x20 HAT Header for Pi Zero)
Display HAT Mini features a bright 18-bit capable 320x240 pixel display with vibrant colours and formidable IPS viewing angles, connected via SPI. It's got four tactile buttons for interacting with your Pi with your digits and a RGB LED for notifications. Pimoroni have also squeezed in a QwST connector (Qwiic / STEMMA QT) and a Breakout Garden header so it's a doddle to connect up different kinds of breakouts.
It will work with any model of Pi with a 40 pin header, it goes with the Raspberry Pi Zero particularly well - Pimoroni have included a pair of standoffs so you can use to bolt HAT and Pi together to make a sturdy little unit. To accommodate the screen Display HAT Mini is a bit bigger than a standard mini HAT or pHAT - it's around 5mm taller than a Pi Zero (so a Mini HAT XL or a Mini HAT Pro, if you will).
Display HAT Mini lets you turn a Raspberry Pi into a convenient IoT control panel, a tiny photo frame, digital art display or gif-box, or a desktop display for news headlines, tweets, or other info from online APIs. This screen is a handy 3:2 ratio, useful for retro gaming purposes!
Features:
Includes
Compatible with:
€26.95
Pimoroni Enviro + Air Quality for Raspberry Pi
PIM 458
The Pimoroni Enviro+ Air Quality for Raspberry Pi is a powerful environmental monitoring add-on that allows students to measure and analyse air quality and environmental conditions using real sensor data. Designed to work seamlessly with Raspberry Pi, this board is ideal for STEM education, data science projects, and real-world environmental investigations.
Enviro+ combines multiple sensors to measure air quality (gas), temperature, humidity, atmospheric pressure, light, and noise levels, making it perfect for projects exploring indoor environments, pollution, climate, and sustainability. Students can collect, visualise, and log data using Python, supporting skills in coding, data analysis, and scientific enquiry.
This board is particularly well suited to project-based learning, including long-term monitoring in classrooms, homes, or outdoor enclosures, and aligns strongly with environmental themes in computing, science, and geography curricula.
Key features:Environmental sensing add-on for Raspberry Pi Measures air quality, temperature, humidity, pressure, light and noise Ideal for STEM, computing, science and environmental monitoring projects Supports Python programming Compact format suitable for classroom and student projects
Enviro+ combines multiple sensors to measure air quality (gas), temperature, humidity, atmospheric pressure, light, and noise levels, making it perfect for projects exploring indoor environments, pollution, climate, and sustainability. Students can collect, visualise, and log data using Python, supporting skills in coding, data analysis, and scientific enquiry.
This board is particularly well suited to project-based learning, including long-term monitoring in classrooms, homes, or outdoor enclosures, and aligns strongly with environmental themes in computing, science, and geography curricula.
Key features:
€69.95
Pimoroni Enviro for Raspberry Pi
PIM 486
Keep track of your surroundings using Enviro for Raspberry Pi! Equipped with a variety of advanced environmental sensors, these boards feature a beautiful full-color LCD screen to showcase your data. They offer an ideal introduction to citizen science and environmental monitoring!
Enviro is designed for indoor monitoring, letting you measure temperature, pressure, humidity, light, and noise level. It's great for keeping tabs on what's going on in rooms in your house, office, or elsewhere. Push the data to server and you can view the data remotely from anywhere.
BME280 temperature, pressure, humidity sensor (datasheet) LTR-559 light and proximity sensor (datasheet) MEMS microphone (datasheet) 0.96" colour LCD (160x80) Pimoroni breakout-compatible pin header pHAT-format board Fully-assembled Compatible with all 40-pin header Raspberry Pi models Python library Dimensions: 65x30x8.5mm
Compatible with:Raspberry Pi 5 Raspberry Pi 4 Raspberry Pi Zero (but needs Male 40-pin 2x20 HAT Header for Pi Zero)
Enviro is designed for indoor monitoring, letting you measure temperature, pressure, humidity, light, and noise level. It's great for keeping tabs on what's going on in rooms in your house, office, or elsewhere. Push the data to server and you can view the data remotely from anywhere.
Compatible with:
€39.95
Pimoroni Explorers Hat Pro for Raspberry Pi
PIM 082
Unlock a world of possibilities with the Raspberry Pi Pimoroni Explorer's Hat Pro for 40 Pin. Seamlessly integrate sensors, buttons, and LEDs into your Raspberry Pi projects, transforming them into interactive experiences. Whether you're building robots, IoT devices, or custom interfaces, this Hat delivers unparalleled control and functionality. Its compact form factor and easy-to-use design make it the ideal choice for makers of all skill levels. Elevate your Raspberry Pi projects with the Pimoroni Explorer's Hat Pro and explore the endless potential of your creations.
Four buffered 5V tolerant inputs (perfect for Arduino compatibility) Four powered 5V outputs (up to 500mA total across all four channels) Four capacitive touch pads (labelled 1, 2, 3, 4) Four capacitive crocodile clip pads (labelled 5, 6, 7, 8) Four coloured LEDs (red, green, blue, and yellow) Four analog inputs Two H-bridge motor drivers (up to 200mA per channel; soft PWM control) A heap of useful (unprotected) 3v3 goodies from the GPIO A mini breadboard on top! Explorer HAT Pro pinout Compatible with all 40-pin header Raspberry Pi models/li> Python library Comes fully assembled
Notes
The inputs use a 5-channel buffer that will accept anything from 2V-5V as logic high
Mini breadboard had 170 points, 17x5 per half of the breadboard
Compatible with:Raspberry Pi 4 Raspberry Pi 5 Raspberry Pi Zero(but needs Male 40-pin 2x20 HAT Header for Pi Zero)
Notes
The inputs use a 5-channel buffer that will accept anything from 2V-5V as logic high
Mini breadboard had 170 points, 17x5 per half of the breadboard
Compatible with:
€27.95
Pimoroni Inky pHAT for Raspberry Pi – Black/White
PIM 368
A low-energy, high-falutin, electronic paper (ePaper / eInk / EPD) display for your Pi, in black/white!
Inky pHAT's beautiful, high contrast display is ideal for displaying simple graphics and crisply-rendered text and, because it's like paper, it's readable in bright sunlight. You could use Inky pHAT as a cute little clock, display tweets on it, the weather, news headlines, sports scores, and more. It's also ideal for graphing data from remote sensors, CPU load or temperature, or stock prices.
Features:2.13" EPD display Inky pHAT pinout Compatible with all 40-pin header Raspberry Pi models Python library Comes fully assembled
Compatible with:Raspberry Pi 5 Raspberry Pi 4 Raspberry Pi Zero(but needs Male 40-pin 2x20 HAT Header for Pi Zero)
Inky pHAT's beautiful, high contrast display is ideal for displaying simple graphics and crisply-rendered text and, because it's like paper, it's readable in bright sunlight. You could use Inky pHAT as a cute little clock, display tweets on it, the weather, news headlines, sports scores, and more. It's also ideal for graphing data from remote sensors, CPU load or temperature, or stock prices.
Features:
Compatible with:
€29.95
Pimoroni Pirate Audio Headphone Amp for Raspberry Pi
PIM 482
Bring music and sound projects to life with the Pimoroni Pirate Audio Headphone Amp for Raspberry Pi. This compact add-on board combines a high-quality headphone amplifier with a vivid colour display, perfect for creating your own media player or interactive audio project.
The Pirate Audio Headphone Amp from Pimoroni is a clever add-on board designed to deliver excellent sound quality straight from your Raspberry Pi. It includes a built-in 24-bit DAC and 3.5mm stereo headphone output, ensuring crystal-clear audio for your custom music or podcast projects.
The board also features a bright 1.3" IPS colour display and four tactile control buttons, letting you view album artwork, track details, or system info directly from your Pi. It connects neatly via the 40-pin GPIO header, keeping your setup compact and tidy.
Ideal for creating:Raspberry Pi-based music players and jukeboxes Portable headphone amplifiers Interactive sound installations Educational audio projects
Dimensions: Approx. 65mm x 30mm
The Pirate Audio Headphone Amp from Pimoroni is a clever add-on board designed to deliver excellent sound quality straight from your Raspberry Pi. It includes a built-in 24-bit DAC and 3.5mm stereo headphone output, ensuring crystal-clear audio for your custom music or podcast projects.
The board also features a bright 1.3" IPS colour display and four tactile control buttons, letting you view album artwork, track details, or system info directly from your Pi. It connects neatly via the 40-pin GPIO header, keeping your setup compact and tidy.
Ideal for creating:
Dimensions: Approx. 65mm x 30mm
€29.95
Pimoroni Pirate Audio Line-out for Raspberry Pi
PIM 483
Plug Pirate Audio Line-out for Raspberry Pi into your hi-fi amp or powered speakers, then sit back, relax, and soak in the rich, digital audio. It has a high-quality I2S DAC, high-res colour display, and playback control buttons.
This board is perfect for upgrading an existing hi-fi amp and speakers, or a set of powered monitors, with digital audio from local audio files (MP3, FLAC, etc.) or from streaming services. The DAC on Pirate Audio Line-out gives you crisp 24-bit / 192KHz digital audio through its 3.5mm stereo jack.
Pirate Audio is a range of all-in-one audio boards for Raspberry Pi, with high-quality digital audio, beautifully-crisp IPS displays for album art, tactile buttons for playback control, and our custom Pirate Audio software and installer to make setting it all up a breeze.
Features:Line-level digital audio (24-bit / 192KHz) over I2S PCM5100A DAC chip (datasheet) 3.5mm stereo jack 1.3" IPS colour LCD (240x240px) (ST7789 driver) Four tactile buttons Mini HAT-format board Fully-assembled Compatible with all 40-pin header Raspberry Pi models Pirate Audio software Dimensions: 65x30.5x9.5mm
Compatible with:Raspberry Pi 5 Raspberry Pi 4 Raspberry Pi Zero(but needs Male 40-pin 2x20 HAT Header for Pi Zero)
This board is perfect for upgrading an existing hi-fi amp and speakers, or a set of powered monitors, with digital audio from local audio files (MP3, FLAC, etc.) or from streaming services. The DAC on Pirate Audio Line-out gives you crisp 24-bit / 192KHz digital audio through its 3.5mm stereo jack.
Pirate Audio is a range of all-in-one audio boards for Raspberry Pi, with high-quality digital audio, beautifully-crisp IPS displays for album art, tactile buttons for playback control, and our custom Pirate Audio software and installer to make setting it all up a breeze.
Features:
Compatible with:
€29.95
Raspberry Pi 12.5W Micro USB Power Supply (For Pi Zero)
RP SC0625
The official and recommended micro USB power supply for all micro USB-powered Raspberry Pi computers - including the new Raspberry Pi Zero 2.
1.5m long cable Republic of Ireland / United Kingdom (3-pin UK-style plug)
Compatible with:Raspberry Pi Zero 2 Raspberry Pi Zero WH Raspberry Pi Zero W Raspberry Pi Zero 1.3 Raspberry Pi 3B/3B+
Compatible with:Raspberry Pi Zero
Compatible with:
Compatible with:
€9.15
Payment options
